Clearance & Marker Lamps
-
MAXXIMA 1.5" MINI 3 LED COURTESY LIGHT - RED
• 12.8 VDC, Amp Draw - 50 Ma
• 2 Male.180 Bullet ConnectorsOut of stock -
MAXXIMA 1.5" MINI 3 LED COURTESY LIGHT - AMBER
• 12.8 VDC, Amp Draw 50 Ma
• 2 Male .180 Bullet Connectors -
MAXXIMA 1-1/4" 6 LED CLEARANCE/MARKER - RED
• 12.8 VDC, 80ma Max Amp Draw
• Male Bullet Connectors With 7" Leads -
MAXXIMA 2-1/2" 13 LED CLEARANCE MARKER - RED
• 7.7 - 14.0 VDC, 100 Milliamps Draw
• 100,000 Hour Rated LED Life -
MAXXIMA 4" LOW PROFILE CLEARANCE MARKER LIGHT - RED
• 12.8 VDC, Amp Draw 100 Milliamps
• 6" Lead With Bullet & Ring -
MAXXIMA FLUSH MOUNT CAB MARKER - AMBER
• 12.8 VDC, 90 Milliamps Draw
• Hi-Impact Acrylic Lens And Housing, Flush MountFreightliner/Volvo Trucks -
MAXXIMA COMBINATION CLEARANCE MARKER - RED
• 12.8 VDC, 80 Milliamps Draw
• Super Bright Red -
MAXXIMA 4" COMBINATION CLEARANCE MARKER - RED/CLEAR DUAL VOLTAGE
• 12.8 VDC, Amp Draw 110 Milliamps
• Polycarbonate, Bullet & Ring Connector -
MAXXIMA 4" COMBINATION CLEARANCE MARKER LIGHT - AMBER/CLEAR
• 12.8 VDC, Amp Draw 110 Milliamps
• Polycarbonate, Bullet & Ring Connector -
MAXIMMA 6-5/8" LED CHROME OVAL CLEARANCE MARKER - AMBER/CLEAR
• 12.8 VDC, Amp Draw 60 Milliamps
• PL-2 Connectors -
M1 Series LED Clearance Marker Light-AMBER
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Molded bullet kits come with two replacement mating connectors
• Potted -
School Bus Wedge Marker Light-AMBER
• Adaptable front/side/rear mount
• Galvanized Steel/Acrylic
• Fits most school bus applicationsOut of stock -
SuperNova Thin-Line LED Clearance Marker Light
• AMBER-Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal pigtail -
SuperNova 2 1/2" LED Clearance Marker Lights
• AMBER-Hermetic lens-to-housing seal
• Encapsulant potting for total circuit-board protection
• Uses the same UBS double-seal pigtail as the incandescent version for -
MicroNova Dot LED Clearance Marker Light-AMBER
• No fasteners required
• Sleek aerodynamic styling extends less than 3/8" from mounted surface -
Torsion Mount III Oval Turn Marker Light-AMBER
• Contains reflex reflector
• Fits standard oval lamp grommets and brackets
• Extended dome for added visibility from front and rear
•Out of stock -
SuperNova Oval LED Side/Turn/Marker Light
• Male pin and hard shell connection options
• Flashing turn signal is visible to driver during operation
• Single circuit board and single reflector -
Clearance Marker Replacement Lens
• Beehive Lens, Amber
• Fits Marker# 45023 -
2" 9-Diode Beehive LED Clearance Marker Light
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• Same UBS double-seal pigtail as the incandescent version for -
4" Cab Marker 2 Wire-Red
• With Shield Use 5120-1300-20Out of stock -
2 1/2" Oval LED Clearance / Marker Lamp
Amber LED, Clear Lens
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lampOut of stock -
Thin-Line Single-Bulb Clearance / Marker Lamp
• Red,Polycarbonate / Acrylic
• Narrow rail and channel-mounting
• Snap-on lens for easy bulb replacement
• Attached pigtail -
Low-Profile Clearance Marker Light-RED
• Built-in Reflector, w/Bezel
• Field-replaceable lens
• Requires 1 1/4" socket hole for mounting
• Twist-in bulb socket for easy bulb replacement
• Polypropylene/Stainless-Steel/Acrylic -
Low-Profile Clearance Marker Light-AMBER
• Built-in Reflector, w/Bezel
• Field-replaceable lens
• Requires 1 1/4" socket hole for mounting
• Twist-in bulb socket for easy bulb replacement
• Polypropylene/Stainless-Steel/Acrylic -
SuperNova® 2 1/2" PC-Rated Clearance / Marker LED Lamp
• Red, Polycarbonate
• Hermetic lens-to-housing seal
• Encapsulant potting protects the circuit board from vibration and corrosive particles providing longer life
• Uses same -
SuperNova® 2 1/2" PC-Rated Clearance / Marker LED Lamp
• Amber, Polycarbonate
• Hermetic lens-to-housing seal
• Encapsulant potting protects the circuit board from vibration and corrosive particles providing longer life
• Uses sameOut of stock -
Field Resealable Lens Turtleback II Clearance / Marker Lamp
• Red, Polycarbonate / Acrylic -
SuperNova 2" LED Clearance / Marker Lamp
• Amber, Polycarbonate
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Uses same UBS double-seal pigtail as incandescent for quick Plug-and-Go® -
SuperNova 2 1/2" LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Uses same UBS double-seal pigtail as incandescent version for a quick -
SuperNova 2 1/2" Beehive LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit-board protection
• Tin-plated, solid brass terminals are sealed to housing, to resist corrosion and eliminate