Electrical Maintenance
-
HOSE REMOVAL TOOL
• Great for the removal of rubber hoses from inlets, outlets and clamps.
• 8 1/2" overall length with 4" exposed shaft.
• Specially designed end makes -
WEATHER PACK TERMINAL CRIMPING KIT
• Complete kit to crimp and release Weather Pack terminals
• Die Set designed to complete two actions in one step - crimps the tabs -
DEUTSCH TERMINAL CRIMPER 14-18 GUAGE
• For use with 20 & 22 gage (Contact Size 20) closed barrel terminals.
• Easy to use - Just insert terminal and wire, then -
7-Way LED Solid Pin System Checker
• Black Lexon with LED indicatorsOut of stock -
RATCHETING WEATHERPACK TERMINAL CRIMPER
• For most Weatherpack terminals and non insulated open barrel connectors 22-10 AWG.
• Ensures a perfect crimp every time.
• Crimping tool has a -
20PC BACK PROBE KIT
• Use to back probe harness connectors, fuel injectors and automoitve sensors
• Straight, 45 degree & 90 degree stainless steel probes in .027" and .040" -
Heavy Duty Automotive Logic Probe
• Quickly and safely tests high and low voltages (power and ground) on all vehicle circuits, including computerized engine and body controls.
• Dual color -
Rosin Core Solder 60/40 1Lb.
• Core Type: Activated Rosin Flux Core -
GROTE DEUTCH & WEATHER PACK TERMINAL TOOL
• For Solid & Open Barrel
• 18-16 Wire Gauge -
Open Barrel Crimping Tool
• Crimps most open barrel terminals such as Deutsch, computer sensor and Weatherpack
• For wire sizes 14-24 gage
• Thin profile allows crimper to access -
DEUTSCH 6PC TERMINAL CRIMP SET
• Crimps both Open Barrel Terminals and Closed Barrel Terminals
• The Release Tools have stainless steel shafts and knurled, color coded
aluminum handlesA complete six piece kit to crimp and release the Deutsch terminals found throughout the industry on trucks, construction equipment, motorcycles, race cars, agricultural and marine equipment, heavy duty vehicles and other vehicles and equipment subject to excessive vibration and wherever an environmentally sealed connection is used -
DEUTSCH TERMINAL CRIMPER 12 GUAGE
• For use with 12 gage (Contact Size 12) closed barrel Deutsch terminals
• Easy to use - Just insert terminal and wire, then squeeze -
Quick Cable 22" Hand-Held Heavy Duty Cutter
• Cuts up to 250 mcm copper cable or 6/0
• Comfortable hand grips -
HD 8" Wire Stripper, Cutter & Crimping Tool
• Crimps insulated & non-insulated terminals 22-10 Gauge
• Self-adjusting wire stripper for 26-10 Gauge wire
• Built in cutter
• Makes a clean cut and -
Trailer Cable & Circuit Tester 12-24V
• Uses high quality brass pins for reliable contact
• LEDs quickly identify faulty circuits in either of the connector cord assembly or the -
WIRE STRIPPER 22-12 AWG.
• Automatically adjusts to wire size.
• Cuts and strips solid or stranded 22-12 AWG.
• Handles single or multiple conductor wire.
• Easy to use -
DEUTSCH REMOVAL TOOL SET 14-24GA
• Use to release Deutsch terminals from connectors
• Provides coverage in three wire gage ranges: 14-16, 16-18 & 20-24
• Color coded for easy -
MASTER 11PC DEUTSCH TERMINAL SERVICE KIT
• Crimps both Open Barrel Terminals and Closed Barrel Terminals
• The Release Tools have stainless steel shafts and knurled, color coded
aluminum handlesA complete 11 piece kit to crimp and release the most popular automotive specialized terminals found on cars, trucks, construction equipment, motorcycles, race cars, agricultural and marine equipment, heavy duty vehicles and other vehicles and equipment subject to excessive vibration and wherever an environmentally sealed connection is used. -
Brute Heavy Duty Hammer Crimper
• Crimps 8 thru 4/0 gauge connectors
• Spring loaded pin locks in “up” position for loading connector and cable
• When released pin holds -
QUICK CABLE 9" CABLE CUTTER
• Cuts cable up to 2/0 gauge
• Made of forged steel, with insulated grips
• 9" size, fits any tool box
• Ergonomic, insulated -
Cable Tie Tensioner & Cutter Twister Tool
• Compact tensioning tool enables cinching and cutting
• For cable ties ranging from 18 lb - 50 lb tensile strength
• Twisting action leaves aOut of stock -
Crimper - Insulated/Non-Insulated Terminals
• Crimps insulated and non insulated terminals 22-10 gauge
• Ergonomic handle for safety and ease of use
Gauge: 22-10 Gauge
Pack Qty.: 1
Length: 9" -
Hands Free Butane Heat Torch
• Hands free - slide lock for continuous use and instant operation
• Ergonomic handle design ensures a non-slip grip
• Removable base for table-top or hand-held useOut of stock
7 POLE SOCKET & PLUG BRUSH KIT
• Used for cleaning 7 Pole plugs and Sockets
• Ergonomic Design, heavy duty construction
Features: Plug and Socket Brush
Pack Quantity: 1
OEM "Metri-Pack" Removal Tool
• Wide blade with a blue handle
• Male Tangless; Lamp Socket Bases
• Used to remove: 56 Series; 280, 480, 630 & 800 Metri-Pa
GROTE OEM PACKARD STYLE TERMINAL EXTRACTOR TOOL
• Used to release most Packard, GM, Ford and Chrysler
OEM terminals from their insulated housings
Quick Cable Hex-Crimp PRO 34" Crimp Tool
• For 8 - 4/0 Gauge Cable
• Comfortable hand grips
• Application data listed on tool
• Adjustable rotating dies always in
JUMPER TEST LEADS
• Two 30" leads of highly insulated wire.
• Color coded - one lead black and one lead red.
Crimper - Heat Shrinkable Terminals and Connectors 22-10 GA
• Designed to crimp a commerical grade - full cycle crimp
• Ergonomic design for easy use
• Ratcheted design eliminates variability from crimpOut of stock
Charging Clip - Black
• Used for testing and charging applications
• Color coded
• Jaws accomodate up to 5/16"
Gauge: 5 AMP
Pack Qty.: 1
Color: Black
Out of stock