Clearance & Marker Lamps

2 1/2" Surface-Mount Single-Bulb Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• 12,000+ hour bulb
• Snap-on lens for easy bulb replacement
• Heavy-duty 2

2 1/2" Clearance / Marker Lamp
• Red, Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• 12-volt version features a

Clearance / Marker Lamp
• Red, Polycarbonate
• Hermetic lens to housing seal
• 12-volt version features a 12,000+ hour bulb
• Uses double-seal UBS pigtail
• Rectangular shape fits narrow applications
• Meets PC

Two-Bulb Square-Corner Clearance / Marker Lamp
• Amber, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at a

SuperNova LED Clearance / Marker Lamp
• Amber Lens, Yellow Body, Polycarbonate
• Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal

SuperNova® LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit board protection
• Hermetic lens to housing seal
• Advanced pin connection system
• Uses same UBS pigtail as incandescent

SuperNova 3" Thin-Line LED Clearance / Marker Lamp
• Amber, Polycarbonate
• 3" mounting center
• Field-replaceable lens
• Encapsulant potting for total circuit-board protection
• Anti-torque design protects against over-tightening and lens cracking
• Wire

SuperNova® Low-Profile LED Clearance / Marker Lamp
• Amber, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lens

MicroNova LED Clearance / Marker Lamp
• Red w/Chrome Bezel, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant

15" Thin-Line LED Bar Lamp
• Red, Polycarbonate
• Rated to 100,000 hours of serivce life
• Sealed marker lamps are shock- and vibration-resistant
• Impact-resistant housing is sealed for moisture protection

Oval Torsion Mount III Side Turn/Marker Lamp
• Amber, Polycarbonate
• Torsion Mount® III, Gel-Mount® bulb cradle design minimizes bulb vibration
• Extended dome for added visibility from front and rear
• Fits standard

Sentry Sealed Marker/Side Turn Lamp
• Amber, Black Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded dock applications
• Sentry lamp

Sealed Turtleback II Clearance / Marker Lamp - ABS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®

Hi Count Turtleback II LED Lamp-Red
• Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Molded bullet with chassis ground-ring terminal connection
• Shock absorbing, heat-resistant lens and

Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when

SuperNova 2" LED Clearance Marker Light-AMBER
• Hermetic lens-to-housing seal
• Fits all popular mountings and grommets
• Fully sealed electronics using encapsulant potting
• Meets PC function when mounted

Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene

Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene

15" Thin-Line 3-LED Light Bar-RED
• Rated to 100,000 hours of service life
• Sealed marker lamps are shock and vibration-resistant
• Impact-resistant housing is sealed for moisture protection

Dual Intensity MicroNova Dot LED Marker Light-RED
• Hermetic lens-to-housing seal
• Dual Intensity allows for better visibility
• Sleek aerodynamic styling, small size fits in narrow applications
• Encapsulant

Rectangular Split Lens Clearance Marker Light
• Hermetic lens-to-housing seal
• Narrow mounting applications
• Rectangular, double bulb lamp
• 12-volt version features a 12,000+ hour bulb
Material: Polycarbonate
FMVSS:

2" Round Clearance Marker Light-Amber
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

Rectangular Clearance Marker Light-Red
• Sealed lamp design
• 3-diode LED pattern
• Fits all popular mounting accessories
• Standard female pin connector

Rectangular Clearance Marker-Red
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

Rectangular Clearance Marker-Red
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

School Bus Rectangular Marker Light-AMBER
• Fits most school bus applications
• OEM-style w/Included mounting pad

Flush-Mount Cab Marker Light-AMBER
• Polycarbonate Hermetic lens to housing seal

School Bus Wedge LED Marker Light-AMBER
• Potted circuit board
• Mounting gasket included
• Blunt-cut, hardwire termination
• Hermetically sealed construction
• 15 Diodes in both red and Amber

2 1/2" Oval LED Clearance / Marker Lamp
• Amber, Polycarbonate
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached

SuperNova Sealed Turtleback® II LED Clearance / Marker Lamp / PC RATED
• Red, Polycarbonate (Optic) / Acrylic (Reflex)
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid-brass terminals