Clearance & Marker Lamps
- 2 1/2" Surface-Mount Single-Bulb Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• 12,000+ hour bulb
• Snap-on lens for easy bulb replacement
• Heavy-duty 2 - Two-Bulb Square-Corner Clearance / Marker Lamp
• Amber, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at aOut of stock - SuperNova LED Clearance / Marker Lamp
• Amber Lens, Yellow Body, Polycarbonate
• Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal - SuperNova 3" Thin-Line LED Clearance / Marker Lamp
• Amber, Polycarbonate
• 3" mounting center
• Field-replaceable lens
• Encapsulant potting for total circuit-board protection
• Anti-torque design protects against over-tightening and lens cracking
• WireOut of stock - SuperNova® Low-Profile LED Clearance / Marker Lamp
• Amber, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lensMicroNova LED Clearance / Marker Lamp
• Red w/Chrome Bezel, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant15" Thin-Line LED Bar Lamp
• Red, Polycarbonate
• Rated to 100,000 hours of serivce life
• Sealed marker lamps are shock- and vibration-resistant
• Impact-resistant housing is sealed for moisture protectionSentry Sealed Marker/Side Turn Lamp
• Amber, Black Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded dock applications
• Sentry lampSealed Turtleback II Clearance / Marker Lamp - ABS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®Out of stockHi Count Turtleback II LED Lamp-Red
• Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Molded bullet with chassis ground-ring terminal connection
• Shock absorbing, heat-resistant lens andTRUCK-LITE SIGNAL STAT MARKER/CLEARANCE LIGHT - CLEAR
• P2, 2 Screw, Hard-Wired, Stripped End, 12V
• Vulcanized Black Rubber Housing, Aluminum BaseTRUCK-LITE 22 SERIES DUAL-CONTACT MARKER/CLEARANCE LIGHT - AMBER
• Single Bulb, Side/Turn Signal 2 Screw, 12V, PL-3, P2
• Rectangular Sealed Polycarbonate Lens & HousingTRUCK-LITE 26 SERIES INCANDESCENT OVAL MARKER/CLEARANCE LAMP - AMBER
• 12V 2 Bulb, P2, 2-Screw, Hard Wired, Stripped End
• Snap-In Acrylic Lens, Two #194 Wedge Base BulbsTRUCK-LITE 26 SERIES INCANDESCENT MARKER/SIGNAL LIGHT - AMBER
• 12V Round Single Bulb, Stainless Steel Housing, Acrylic Lens
• P2, 2 Screw Mount, Hard Wired, Stripped EndTRUCK-LITE LED 35 SERIES MARKER/CLEARANCE LIGHT KIT - RED
• Rectangular, P2, 2 Screw, Fit 'n Forget, Horizontal Mount
• 12V, .180 Bullet Terminal/Ring TerminalPETERSON REPLACEMENT LED SIDE MARKER LIGHT
• Fits Peterson 1288 cluster light module
• Sealed component meets IP67 ingress protectionTwo-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function whenClearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/PolypropyleneClearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene15" Thin-Line 3-LED Light Bar-RED
• Rated to 100,000 hours of service life
• Sealed marker lamps are shock and vibration-resistant
• Impact-resistant housing is sealed for moisture protectionCab Marker With Shield 2 Bulb 1 Wire-Red
• 5.25" x 4.68" Chrome Plated Shield5180 Series Incandescent Marker-RED
• 3.5" x 1.5" Acrylic Lens
• Built in shield with plugOut of stockSound Off Signal 120 Series 4" LED Marker Light-Red
• PC/P2 rated combination clearance and marker lights are perfect for front and rear corner mounting
• Light includes neoprene gasket,HD TRUCK/BUS/POLICE/FIRE/EMSSound Off Signal 150 Series 2.5" Beveled LED Marker Light-Amber
• Specially engineered lens to boost light output and brightness
• Sonic welded, waterproof construction
• Lens with UV inhibitorHD TRUCK/BUS/POLICE/FIRE/EMSSound Off Signal Triangle Cab Clearance Marker-Amber
• Specially engineered lens to boost light output and brightness
• Sonic welded, waterproof construction
• Lens with UV inhibitor prevents sun fadeHD TRUCK/BUS/POLICE/FIRE/EMSOut of stockTRUCK-LITE 18 SERIES MARKER/TURN-SIGNAL-AMBER
• Lamp Kit w/2-Wire Deutsch Type PlugMAXXIMA 1.5" COURTESY LIGHT-BLUE/CLEAR
• Self Adhesive Surface Mount Using 3m VHB Tape
• Sealed with Polycarbonate Lens And HousingOut of stockMAXXIMA 3-3/4" 6 LED CLEARANCE MARKER LIGHT - RED
• 12.8 VDC, 40 Milliamps Draw
• Flush Mount, Chrome TrimOut of stockMAXXIMA 4" LOW PROFILE CLEARANCE MARKER LIGHT - AMBER/CLEAR
• 12.8 VDC, Amp Draw 100 Milliamps
• 6" Lead With Bullet & RingMAXXIMA 4" COMBINATION CLEARANCE MARKER LIGHT - AMBER
• 12.8 VDC, Amp Draw 110 Milliamps
• Polycarbonate, Bullet & Ring Connector