Flashers
-
Electronic Lighting Control Module
• 10-Pin, 12V - 25A max
• Maintains factory flash rate when retrofitting to LED lamps
• Direct replacement to OEM lighting -
Electro-Mechanical Flasher
• 12-Lamp, 3 Terminal
• 60 to 120 flashes per minute
• Less than 4 mill volts per amp voltage drop
• Exceeds SAE 100-hour test
• Fits in a round flasher socket -
10-Lamp Variable-Load LED Flasher
• 2 TERMINAL 12V - 1A to 20A
• 60 to 120 flashes per minute
• Heavy-duty contacts; external wire provides ground
• Steady flash rate for all LED and -
Solid State Headlight Flasher
• Select-A-Pattern Technology, 7 user-selectable flash patterns:
Road Runner (115 fpm alternating)
Power Pulse (180 fpm alternating)
Double Flash (50 fpm)
ETM/Emergency Traffic Mover (3.6HD TRUCK/BUS/POLICE/FIRE/EMS -
Solid-State Electronic Flasher-4 wire
• Designed for use with LED lighting
• Fully-potted, solid-state electronics
• Provides steady flash rate over any load up to 12 Amps
• Self-resettingOut of stock -
BOSCH FLASHER 12V 6-TERMINALHD TRUCKS/BUS/EQUIPMENT -
FLASHER 12V 4-TERMINALCASE/NEW HOLLAND EQUIPMENTOut of stock -
LED TURN SIGNAL FLASHER 3-TERMINALFORD TRUCK
2003- 2013 Ford E-150
2003- 2005 Ford E-150 Club WagonOut of stock -
HD Professional Emergency Flasher
• Wigwag pattern w/Hi-beam override
• Not for use with negative-activation headlight systems
• Voltage Amp:12V/20A max each side
• Completely Sealed in Epoxy Potting -
Hella FLASHER 12V 7 PIN Sealed
• Flasher unit that operates 2 bulbs on either side of vehicle
• Separate outputs for left and right side along with left andOut of stock -
VANNER 3 CIRCUIT 70A FLASHER 12VDC
• 52-68 FPM at 50% Duty Cycle
• Dual Flasher Alternates Between A & B/C Circuits
• Short Circuit & Reverse Input Voltage ProtectedHEAVY DUTY TRUCK, BUS, RV & EQUIPMENT
EMERGENCY VEHICLES, FIRE TRUCK & EMS -
16-Lamp Electronic Flasher
• 2 TERMINAL, 12V - 2 to 33A
• 60 to 120 flashes per minute
• 11 to 15-Volts DC
• Less than 4-millvolts per amp voltage drop
12-Lamp Electromechanical Flasher
• 3 TERMINAL 12V - 2 to 25A
• 60 to 120 flashes per minute
• Less than 4 mill volts per amp voltage drop
• Exceeds SAE 100-hour test
Alternating "X" Pattern LED Strobe Light Kit
• Used with LED lamps that pull fewer amps
• Used to create an alternating “X”?? pattern
• Turn signal lamp override whenOut of stock
Truck-Lite Ever-Flash 3 Prong 12V Flasher
• Flashes up to five 32 CP bulbs per side, plus pilot bulb
• Flashes ten 32 CP bulbs for hazard warning
25 amp
LED Flasher Control Module
• 16 Selectable Flash Patterns
• Sync or Alternating Flash Patterns
• Sealed Moisture Corrosion Proof Electronics
• 2.6" Wide x 1.8" Height
• 12.8 Volt
MAXXIMA 3-PIN LED FLASHER - 240FPM
• Converts LED's into strobe lights
Solid-State Electronic Flasher-3 Wire
• Designed for use with LED lighting
• Fully-potted, solid-state electronics
• Provides steady flash rate over any load up to 12 Amps
• Self-resetting featureOut of stock
Velvac Heavy Duty 12V Flasher 3 Terminals
• 2-16 Lamp Rating at 35 Amp Rating
• 70-120 Flash Rate FPM
• Designed and tested to perform in excess of one
VANNER 2 CIRCUIT 50A FLASHER 12VDC
• 60 FPM at 50% duty cycle
• Dual Flasher Alternates Between A & B Circuits
• Short Circuit & Reverse Input Voltage ProtectedHEAVY DUTY TRUCK, BUS, RV & EQUIPMENT
EMERGENCY VEHICLES, FIRE TRUCK & EMS
VANNER 3 CIRCUIT 70A FLASHER 12VDC
• 75-80 FPM at 50% duty cycle
• Dual Flasher Alternates Between A & B/C Circuits
• Short Circuit & Reverse Input Voltage ProtectedHEAVY DUTY TRUCK, BUS, RV & EQUIPMENT
EMERGENCY VEHICLES, FIRE TRUCK & EMS
WIG-WAG ALTERNATING FLASHER
• 12V 3-TERM w/Ground
• LED Compatible 15 Amp SurgeOut of stock
Electronic LED Flasher
• 4-Pin, 3-6 Lamp
• Direct replacement for OE flasher
• Doesn't require a separate ground wire; uses factory wiring
• Provides a steady flash rate forOut of stock
HELLA FLASHER 12V 2 PIN
• High capacity flasher with 6 bulb maximum.
• Suitable for hazard warning applications.
• Max Load: 12 lamps / 25 Amps (Hazard)
HELLA FLASHER 24V 3 PIN
• High capacity flasher with 5 bulb maximum.
• Suitable for hazard warning applications.
• Max Load: 10 lamps SAE # 1683 (Hazard)
Electro-Mechanical Flasher
• 12-Lamp, 2 Terminal
• 12V - 2 to 25A
• 60 to 120 flashes per
European Stlye 3 Pin Flasher
• Heavy-duty contacts
• Flash rate electronically timed
• Steady flash rate for all incandescent and LED leads
• Fits most Toyota, Chrysler and pre
HD ELECTRONIC FLASHER 24V 4-TERMINALIVECO/VOLVO EQUIPMENT
FLASHER 24V 3-TERMINAL 50wattSCANIA,SETRA APPLICATIONSOut of stock
Solid State 8-lamp Modular Flasher
• 8 and 4-way lamp operation
• 16 Amps per channel short circuit protected
Width 2.30" (58.4 mm)
Height 4.96" (125.9 mm)
Depth 1.03" (26.1Out of stock