Battery Isolators
-
BATTERY ISOLATOR 200A 2 BATTERY
• 200A at 12V DC, 12-36V
• (3)5/16" (7.9mm) studs
• (4)9/32" (7.2mm) diameter mounting holes
• Size: 8-1/2L x 4-3/16W x 3-13/32HHD TRUCK/BUS/EMS/MARINE
• Schottky Diode - Comply With Federal Spec KKK-A-1822B for AmbulancesOut of stock -
BATTERY ISOLATOR 200A 2 BATTERY
• 200A at 12V DC, 12-36V
• (3)5/16" (7.9mm) studs
• (4)9/32" (7.2mm) diameter mounting holes
• Size: 8-1/2L x 4-3/16W x 3-13/32HHD TRUCK/BUS/EMS/MARINE
• Use with Alternators without Integral Electronic Voltage Regulator -
BATTERY ISOLATOR 140A 2 BATTERY W/IGN CIRCUIT
• 140A at 12V DC, 12-36V.
• (3)5/16" (7.9mm) studs and (1)No.10 stud.
• (4)9/32" (7.2mm) diameter mounting holes.
• Size: 6LHD TRUCK/BUS/EMS/MARINE
• Use with Delcotron-Type Alternators -
BATTERY ISOLATOR 200A 2 BATTERY W/IGN CIRC.
• 200A at 12V DC, 12-36V
• (3)5/16" (7.9mm) studs and (1) No.10 stud.
• (4)9/32" (7.2mm) diameter mounting holes.
• Size: 8-1/2LHD TRUCK/BUS/EMS/MARINE
• Use with Delcotron-Type Alternators
-
BATTERY ISOLATOR 75A 1 BATTERY
• Schottky DiodeHD TRUCK/BUS/EMS/MARINEOut of stock -
BATTERY ISOLATOR 70A 2 BATTERY
• 70A at 12V DC, 12-36V
• (3)1/4" (6.4mm) studs
• (2)9/32" (7.2mm) diameter mounting holes
• Size: 5L x 3-1/4W x 2-3/16HHD TRUCK/BUS/EMS/MARINE
• Use with Alternators without Integral Electronic Voltage RegulatorOut of stock -
BATTERY ISOLATOR 90A 2 BATTERY
• 90A at 12V DC, 12-36V
• (3)1/4" (6.4mm) studs
• (2)9/32" (7.2mm) diameter mounting holes
• Size: 6-1/2L x 3-1/4W x 2-13/16HHD TRUCK/BUS/EMS/MARINE
• Use with Alternators without Integral Electronic Voltage RegulatorOut of stock -
BATTERY ISOLATOR 140A 2 BATTERY
• 140A at 12V DC, 12-36V
• (3)5/16" (7.9mm) studs
• (4)Four 9/32" (7.2mm) diameter mounting holes
• Size: 6L x 4-3/16W x 3-11/32HHD TRUCK/BUS/EMS/MARINE -
SURE POWER BATTERY ISOLATOR 210A 6V-48V 210A 6V-48V
• 1 Input 2 Battery Banks
• With Ignition Circuit
Dimensions:
Length 12.5"
Width (Base) 4.5"
Height 2.5"
Height(w/Posts) 3.375"CHEVROLET/GMC MEDIUM DUTY TRUCKS -
Vanner Isolator 75A 1 Input, 1 Battery Bank
• 12V With Schottky Type Diodes
Dimensions:
Length 4.724in / 120mm
Width 2.992in / 76mm
Height 3.228in / 82mmAmbulance, Fire & Rescue Vehicles -
BATTERY ISOLATOR 90A 2 BATTERY W/IGN CIRCUIT
• 90A at 12V DC, 12-36V
• (3)1/4" (6.4mm) studs and (1) No.10 stud.
• (2)9/32" (7.2mm) diameter mounting holes.
• Size: 6-1/2LHD TRUCK/BUS/EMS/MARINE
• Use with Delcotron-Type AlternatorsOut of stock -
Vanner Isolator 180A 1 Input, 2 Battery Banks
• 12V-24V With Schottky Type Diodes
Dimensions:
Length 9.843in / 250mm
Width 4.409in / 112mm
Height 3.78in / 96mmAmbulance, Fire & Rescue Vehicles