Reflectors & Safety
- Aluminum Two-Hole Mounting Reflector - Red
• Lens gasket cushions lens and protects prisms against dirt
• Lightweight housing
• Low profile - 41142$2.04
GROTE 3" STICK-ON TAPE REFLECTORS - RED
• Adheres permanently to flat or curved surfaces
• Exceeds DOT and SAE "A" reflex requirements
• Durable, impact resistant - 98175R$2.29
TRUCK-LITE 3" ROUND ADHESIVE REFLECTIVE TAPE-RED
• Easy to apply, simply bend, peel and apply
• No drilling or mechanical fasteners needed
• Meets and exceeds DOT and SAE requirementsOut of stock3" Round Stick-On Reflector
• Adhesive backing protects prism against dirt
• Firm-stick backing for instant bond and lasting adhesion
1 11/16" x 4 1/4" Stick-On Tape Reflectors-AMBER
• Adheres permanently to flat or curved surfaces
• Exceeds DOT and SAE "A" reflex requirements
• Durable, impact resistantTRUCK-LITE CENTER MOUNT REFLECTOR3 1/2" Sealed Center-Mount Reflector - Red
• Hermetically sealed
• Simple installation with single #10 screwRTR10150711CB$169.17OPTRONICS VEHICLE CONSPICUITY TAPE RED/WHITE
• Alternating 7” red/11” white pattern
• Tape is 2” wide, supplied in 150-ft rollsRTR10150WB$169.17OPTRONICS VEHICLE CONSPICUITY TAPE-WHITE
• Tape is 2” wide, supplied in 150-ft rolls
• Marked “DOT-C2” per NHTSA 9CFR571.1082 1/2" Round Stick-On Reflector-RED
• Adhesive backing protects prism against dirt
• Firm-stick backing for instant bond and lasting adhesion
3" Round Stick-On Reflector-Amber
• Adhesive backing protects prism against dirt
• Firm-stick backing for instant bond and lasting adhesionRefelctor Tape 2" x 18" Roll
• Exceeds DOT requirements
• Durable, impact and solvent resistant
• Easy installation
• Reflects light even in daytime
• Bright prismatic appearance
•Red Reflective Tape 2" x 150'
• Tough, durable films resists racking and lifting to look like new, long after application.
• .010thin tape with no open cell construction.98107$200.09TRUCK-LITE REFLECTIVE TAPE RED/WHITE 1-1/Mini Stick-On Rectangular Reflectors - Red
• Fits narrow rails and tight spaces
• Mountable with two #8 screws (optional)
• Firm-stick backing for instant bond and lasting adhesion
4 7/16" X 13 1/2" Sealed Center-Mount Reflector-AMBER
• Hermetically sealed
• Simple installation with single #10 screw12" Reflective Strips - Silver
• Sealed optics
• Adhesive-backed and screw-on versions
• Easily mountable on truck or trailerAluminum Two-Hole Mounting Reflector-AMBER
• Lens gasket cushions lens and protects prisms against dirt
• Lightweight housing
• Low profile4 3/8" Oval Reflector-AMBER
• Firm-stick backing for instant bond and lasting adhesion41143$2.04GROTE 3" STICK-ON TAPE REFLECTORS-AMBER
• Adheres permanently to flat or curved surfaces
• Exceeds DOT and SAE "A" reflex requirements
• Durable, impact resistant2 1/2" Round Stick-On Reflector-AMBER
• Adhesive backing protects prism against dirt
• Firm-stick backing for instant bond and lasting adhesion41070$207.55GROTE CONSPICUITY TAPE 1-1/2" X 150'
• Alternating 6" Silver / 6" Red
• Reflects light even in daytime
• Durable, impact and solvent resistantAmber/Yellow Reflective Tape 2" x 150'
• Tough, durable films resists racking and lifting to look like new, long after application.
• .010thin tape with no open cell construction.
•Out of stockGrote 4 3/8" Oval Reflector -Red
• Firm-stick backing for instant bond and lasting adhesion41122$7.47Grote 12" Reflective Strips - Red Sealed optics
• Adhesive-backed and screw-on versions
• Easily mountable on truck or trailer3" Round Stick-On Reflector - Red
• Adhesive backing protects prism against dirt
• Firm-stick backing for instant bond and lasting adhesionMini Stick-On Rectangular Reflectors-AMBER
Fits narrow rails and tight spaces
• Mountable with two #8 screws (optional)
• Firm-stick backing for instant bond and lasting adhesion
4 7/16" X 1 3/162" Round Stick-On Reflector - Red
• Adhesive backing protects prism against dirt
• Firm-stick backing for instant bond and lasting adhesion98176R$2.43TRUCK-LITE REFLECTIVE TAPE 2 X 3.5 RECTAN98175Y$2.29TRUCK-LITE 3" ROUND ADHESIVE REFLECTIVE TAPE-AMBER
• Easy to apply, simply bend, peel and apply
• No drilling or mechanical fasteners needed
• Meets and exceeds DOT and SAE requirementsOut of stock