Vehicle Lighting

MS6 MINI LED LIGHTHEAD-RED
• Ultra thin design to offer a wider range of mounting areas
• Black base for multiple types of applications
• 6 (MS6) or 3 (MS3)

2 1/2" Oval LED Clearance / Marker Lamp
• Red LED, Clear Lens
• Surface-mount design for easy installation
• Sealed lamps provide better protection from

2 1/2" Surface-Mount Single-Bulb Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• 12,000+ hour bulb
• Snap-on lens for easy bulb replacement
• Heavy-duty 2

2 1/2" Clearance / Marker Lamp
• Red, Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• 12-volt version features a

Clearance / Marker Lamp
• Red, Polycarbonate
• Hermetic lens to housing seal
• 12-volt version features a 12,000+ hour bulb
• Uses double-seal UBS pigtail
• Rectangular shape fits narrow applications
• Meets PC

Two-Bulb Square-Corner Clearance / Marker Lamp
• Amber, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at a

SuperNova LED Clearance / Marker Lamp
• Amber Lens, Yellow Body, Polycarbonate
• Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal

SuperNova® LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit board protection
• Hermetic lens to housing seal
• Advanced pin connection system
• Uses same UBS pigtail as incandescent

SuperNova 3" Thin-Line LED Clearance / Marker Lamp
• Amber, Polycarbonate
• 3" mounting center
• Field-replaceable lens
• Encapsulant potting for total circuit-board protection
• Anti-torque design protects against over-tightening and lens cracking
• Wire

SuperNova® Low-Profile LED Clearance / Marker Lamp
• Amber, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lens

MicroNova LED Clearance / Marker Lamp
• Red w/Chrome Bezel, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant

MicroNova Dot LED Clearance / Marker Lamp
• Red, w/Grommet, Acrylic
• Sleek aerodynamic styling extends less than 3/8" from mounted surface
• No fasteners required

Versalite Triple-Pod Recessed-Mount Lamp
• Red, Chrome Finish, ABS/Acrylic
• Six functions: stop, tail, turn, clearance light, back-up light and reflector
• Corrosion-resistant, shock-absorbing construction

Grote Trilliant® 36 LED WhiteLight™ Work Lamp
• Polycarbonate / Aluminum
• UV coated and hard coated lens for durability
• Thermal pull back circuit for protection against power surges
• Aluminum housing with

Grote, Trilliant® 26 LED Work Lamp
• Pendant Mount, Near Flood, 10V-48V
• Die Cast Aluminum, Black Powder Coated Finish / UV resistant, Hard Coated Polycarbonate Lens
• Efficient light engine projects 1790

Sealed Turtleback II Clearance / Marker Lamp - ABS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®

Rubber Body Mount Marker/Clearance-CLEAR
• Compact styling is ideal for narrow body channel mounting
• External mounting holes allow mounting without disassembly
• Black rubber housing
• Snap-in lens permits

19 Series Marker & Clearance Lamp-RED
• Polycarbonate lens & housing
• LED PC Rated Lamp 4 diode pattern w/standard connection
• Light Emitting Diodes (LEDs)Designed at 14v, .05 amp

22 Series Side Turn Rectangular Sealed-Amber
• Polycarbonate lens & housing
• 12v Dual filament baseless bulb
• Dual contact marker/clearance and side turn or auxiliary turn functions

26 Series Marker/Clearance Lamp-Amber
• Snap-In Acrylic lens
• Rubber housing provides additional protection against shock & vibration
• Two #194 wedge base bulbs

LED 35 Series Marker & Clearance-Red
• Polycarbonate lens & housing
• 1 Light Emitting Diode (LED)Designed at .05amp
• 5-Diode Pattern
• 3/4'' wide design narrow rail designs

LED 35 Series Omni Volt Marker & Clearance-Amber w/Clear Lens
• Polycarbonate lens & housing
• 1-2 Diode Pattern
• 1 Light Emitting Diode (LED)Designed at .05amp
• 3/4'' wide

Pop-In Mount/Concealed Warning LED-CLEAR
• 12 VOLT-24 VOLT 1.0 AMPS
• Dual head design eases installation and reduces cost
• Amp connectors between head and power supply unit allows easy

Compact Worklamp Flood Beam
• Two 10-watt LEDs
• 12-24VDC, 1.2AMPS, 1250 Lumens
• Aluminum heatsink housing
• Toughened glass lens
• Steel mounting bracket

30 Series 8 Diode LED Marker Clearance Light-RED
• High Profile Gray Polycarbonate Flange Mount

30 Series 8 Diode LED Marker Clearance Light-RED
• High Profile Gray Polycarbonate Flange Mount

30 Series 8 Diode LED Marker Clearance Light-RED
• High Profile 12V PC, Fit 'N Forget M/C

30 Series 6 Diode LED Marker Clearance Light-AMBER
• Grommet Mount Low Profile 12V PC

Clearance Marker Light 12V 2 Diode LED-RED
• Full pattern light output.
• Designed for areas with limited space.
• Hardwired design eliminates pin corrosion.