Clearance & Marker Lamps
-
M5 Series LED Clearance Marker Light-AMBER
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Small size fits into narrow applications
• Corrosion-resistant chrome-plated bezels
• Kits contain two replacement -
Clearance Marker Replacement Lens
• Economy Cab Lens, AMBER
• Length: 5.19" (131.78mm)
• Width: 1.96" (49.86mm)
• Thickness: 1.41" (35.96mm) -
GROTE CLEARANCE MARKER REPLACEMENT LENS
• Small Aerodynamic Cab Lens, Amber
• Length: 7.5" (190.5mm)
• Width: 2.59" (65.78mm)
• Thickness: 1.87" (47.49mm)Out of stock -
2" 9-Diode Beehive LED Clearance Marker Light
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• Same UBS double-seal pigtail as the incandescent version for -
PETERSON SINGLE DIODE MARKER & CLEARANCE-AMBER
• 9-32V hardwired with 8" leads
• PC Rated, compact design fits 3/4” hole
• Includes rubber mounting grommet -
PETERSON 8" FLANGE MOUNT MID-TURN MARKER LIGHT-AMBER
• 6-diode 9-16V operating range with integral reflex
• Two-function may be used as mid-turn & marker/reflector -
2 1/2" Oval LED Clearance / Marker Lamp
• Red, Polycarbonate
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached to -
SuperNova 2" LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Uses same UBS double-seal pigtail as incandescent for quick Plug-and-Go® -
SuperNova® Low-Profile LED Clearance / Marker Lamp
• Red, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lens
TRUCK-LITE 10 SERIES LED MARKER/CLEARANCE LAMP-RED
• Gray Polycarbonate Flange Mount, PL-10, 12V
• Polycarbonate Lens/Housing, Fit 'n Forget Or Standard
TRUCK-LITE SUPER 21 INCANDESCENT MARKER/CLEARANCE LIGHT - AMBER
• Single Bulb, PC, 2 Screw, Super 21 Plug, 12V
• 12V Designed At 14V, .33 Amp, 2 Cp
TRUCK-LITE 21 SERIES RECTANGULAR SEALED LED MARKER/CLEARANCE LIGHT - AMBER
• 12V Leds Designed At 14V, .05 Amp, PC, 2 Screw
• Fit 'n Forget Reflectorized Polycarbonate Or Acrylic Lens
TRUCK-LITE LED 35 SERIES MARKER/CLEARANCE LIGHT KIT - RED
• Rectangular, P2, 2 Screw, Fit 'n Forget, Horizontal Mount
• 12V, .180 Bullet Terminal/Ring Terminal
Chrome-Armored Clearance Marker Light
• Flat back; no bulb socket hole required
• Direct interchange for competitive models
• Meets PC function when mounted at a 45° angle
• Material:
TRUCK-LITE SIGNAL-STAT LED MARKER/CLEARANCE LIGHT - RED
• Standard PL-10 Connection, P2 12V, Grommet Mount
• Unique 6 Diode Starburst Light Output
TRUCK-LITE SIGNAL-STAT MARKER/CLEARANCE LIGHT - RED
• 12V Bracket Mount, Hardwired, Stripped End, Two Bulb Design
• Optional Mounting Gasket Available
TRUCK-LITE SIGNAL-STAT LED MARKER/CLEARANCE LIGHT - RED
• 12V, P2, Standard PL-10 Connection
• Encapsulated Electronics Prevent Damage From Moisture/Corrosion
TRUCK-LITE SIGNAL STAT LED MARKER/CLEARANCE LIGHT - RED
• P2, 2 Screw, Reflectorized, Hard Wired, Stripped End, 12V
• Optional Mounting & Sealing Gaskets Available To Improve Seal Between Lamps
TRUCK-LITE SIGNAL-STAT LED BEEHIVE MARKER/CLEARANCE LIGHT - RED
• 12V P2 Standard PL-10 Connection
• Replacement For Cab Marker Or Corner Trailer Applications
TRUCK-LITE DUAL FACED LH PEDESTAL LIGHT - RED/AMBER
• 12V ABS Incandescent, Square, 2-Bulb
• 3-Wire Integral Plug, 2-Stud Chrome HousingOut of stock
PETERSON 2" RED CLEARANCE/SIDE MARKER LIGHT
• Functions as side marker or clearance light
• Lens is welded to housing to form single unit
PETERSON 2" LED AUXILIARY TUNNEL LIGHT W/3D ILLUSION-RED
• Mirror look when off, 3D tunnel effect when on
• Compatible with 2" and 2.5" chrome bezels
PETERSON 14" SUBMERSIBLE INCANDESCENT LIGHT BAR-RED
• Stainless steel bar is corrosion-resistant with three sealed lights
• Long-Life bulbs, Pre-wired with 60” lead wire
PETERSON LED 3D AUXILIARY TUNNEL LIGHT-RED
• For off-road or accessory use only
• Mounts on 4" centers using #10 screws
• Hot wire can connect to either leadOut of stock
PETERSON 14" SUBMERSIBLE LED LIGHT BAR-RED
• Stainless steel bar is corrosion-resistant with three sealed lights
• Long-Life bulbs, pre-wired with 60” lead wire
MicroNova LED Clearance Marker Light-RED
• Integrated theft deterrent feature with C-clip makes it difficult to remove the clearance marker light once mounted
• Encapsulant potting for total circuit-board protection
MicroNova LED Clearance Marker Light-AMBER
• Integrated theft deterrent feature with C-clip makes it difficult to remove the clearance marker light once mounted
• Encapsulant potting for total circuit-board protection
M1 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Molded bullet kits come with two replacement mating connectors
• Potted
M3 Series LED Clearance Marker Light-AMBER
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Potted for total circuit-board protection against vibration and corrosion
• Kits
Clearance Marker SuperNova LED Light Bar-RED
• Snap-on replacement lamps
• Sealed flow-through UBS harness
• Rugged reinforced polycarbonate bar
• Voltage Amp: 12V / .18A