Pigtails, Sockets & Equalizers
-
EZ1210$26.67ECCO 12+ PRO VANTAGE CONTROLLER CABLE 15FT
• For use with EZ1202 controller -
TRUX TRIPLE FEMALE BULLET PLUG WIRE HARNESS
• 16 Gauge Wire 6" Spacing Between Plugs -
MAXXIMA TWIN.180 FEMALE BULLET CONTINUOUS WIRE HARNESS
• 12" Leads, 100 Connectors Per Roll
• Red PVC Housing, Non-Corrosive -
PICO HEADLIGHT CONNECTOR-GM/FORD
• Weather-Pack Seal Connector
• 2-Wire 16ga
• For Use With H9 Halogen Pigtail -
PICO TAILLIGHT SOCKET-FORD
• 2-Wire Stop/Tail/Turn
• For Use With Bulb 3157, Part 5485PT -
PICO HEADLIGHT CONNECTOR-GM
• Weather-Pack Seal Connector
• 2-Wire 18ga, Lowbeam
• For Use With 9006 & H4351 Pigtail -
PICO FOG/CORNER LAMP CONNECTOR-GM
• 2-Wire 18ga Leads, Pigtail Plug -
PICO HEADLAMP SWITCH-GM
• 6-Wire Pigtail Connector
• 5 18ga Leads, 1 12ga Lead -
WELDON 3 WIRE PLUG ASSEMBLY -
GROTE INSTRUMENT PANEL & LICENSE SOCKET
• 1 1/8" hole - Universal
• 1 Wire 18 Gauge 12" Long -
GROTE SEALED HORN SOCKET CONNECTOR
• Weather-pack seal connector
• 2 Wire 18 Gauge 12" Long -
PETERSON REPLACEMENT CABLE 15'
• Standard cable included with 778A LED Light Bar -
MAXXIMA 24V TO 12V STEP DOWN MODULE
• 24v Positive Input, 12v Positive Out
• 4 Blunt Cut Leads -
6" Packard Connector Pigtail
• Sealed plug-in style pigtail -
Hard-Shell Connector Pigtail 10"
• Standard 4-Pin Hard Shell connector for the 4-in-1 Stop Tail Turn Light with integrated back-up
• Male Pin connection to vehicle -
Hard-Shell Connector Pigtail 10"
• Standard 4-Pin Hard Shell connector for the 4-in-1 STT with integrated back-up
• Female Pin connection to vehicle -
2 Wire Plug Assembly
• 5150/5180/8020 Series Lamps -
GROTE HEADLIGHT CONNECTOR HARNESS
• 2 Wire 18 Gauge 12" Long
• For use with 9004 & 9007 bulbs -
GROTE RELAY & FLASHER CONNECTOR HARNESS
• 4 or 5 terminal relays or flashers
• 5 Wire 14 Gauge 12" Long -
GROTE STOP, TAIL, TURN & PARK SOCKET ASSEMBLY
• 2 Wire 16 Gauge 6" Long
• For use with 1034, 1154, 1157 bulbs -
Sealed, Economy Clearance / Marker Lamp Pigtail
•6 3/4" Long w/ 3/8" Wire Strip
-
Hard-Shell Connector Pigtail
• 11" Long, Chassis Ground, Blunt Cut Wire
• Mates with competitive lamps using Amp Superseal® 1.5 series connectors -
Clearance / Marker Pigtail
• 6" Long, Chassis Ground, Slim-Line .180 Male
• Fits 4674 series clearance / marker lamps, and 4709 and 6029 / 6030 license and utility lamps
• Factory-molded plugs -
Stop / Tail / Turn Three-Wire Plug-In Pigtails for Female Pin Lamps
• 11 1/2" Long, Chassis Ground, Blunt Cut Wires
• Dual function for S / T / T lamps
• Factory-moldedOut of stock -
GROTE TAIL LIGHT CONNECTOR SOCKET
• 3 Wire 18 Gauge 12" Long
• For use with 3057 & 3157 bulbs -
TRUCK-LITE SIGNAL-STAT BACK-UP/LICENSE/STOP/TURN/TAIL HARNESS
• 1 Plug, 29" 16GA Packard Connector, 36" Lamp to Lamp
• Jumper Harness For 5023/5024 Combo LampNavistar, Volvo & Freightliner Trucks -
TRUCK-LITE LED STOP/TURN/TAIL PLUG
• 16 GA GPT Wire, Fit 'N Forget S.S.
• .180 Bullet Terminal, 8" -
Electrical Connector/Pigtail
• 24" Rear tracking lamp jumper -
TRUCK-LITE RIGHT ANGLE STOP/TURN PLUG
• 16GA GPT Wire, 11", Right Angle PL-2
• Stripped End/Ring Terminal, 11" -
TRUCK-LITE FIT 'N FORGET MARKER CLEARANCE PLUG
• 16GA GPT Wire, .180 Bullet Terminal/Ring Terminal, 5"