Pigtails, Sockets & Equalizers
-
TRUCK-LITE 7" LOW PROFILE MARKER CLEARANCE PLUG
• 16GA GPT Wire, PL-10, Stripped End/Ring Terminal
• Tin plated brass #10 Ring terminal -
GROTE HEADLAMP CONNECTOR SOCKET
• 3 Wire 18 Gauge 12" Long
• For use with H880 lamps -
GROTE TAIL LITE CONNECTOR SOCKET
• 2 Wire 18 Gauge 12" Long
• For use with 3057, 3157, 415 lamps -
GROTE 12V ACCESSORY POWER PLUG
• 18 Gauge blunt cut wire -
GROTE HEADLAMP CONNECTOR SOCKET
• 3 Wire 18 Gauge 12" Long
• For use with H13 & 9008 lamps -
PETERSON 2-WIRE TAILLIGHT PLUG
• #10 Ring Terminal On Ground Wire -
PETERSON 3-WIRE TAILLIGHT PLUG
• #10 Ring Terminal On Ground Wire -
MAXXIMA AUTO SENSE LIGHT CONTROLLER HARNESS
• 12.8VDC, Master Output Rating 2 Amp, Controlled 8 Amp
• Works With LED Or Incandescent Lights In Any Combination -
TURN SIGNAL BULB HOLDER SOCKET
• For use with 3157 bulbsFreightliner Trucks -
TRUCK-LITE UNIVERSAL SNOW PLOW ATL HARNESS
• 2 Plug, For 114" Snow Plow, 16 Gauge
• Meyer Plug, Ring Terminal, Blunt Cut -
TRUCK-LITE TURN SIGNAL ADAPTER PLUG
• 16GA GPT Wire, Female PL-2, Fit 'n Forget S.S., 8" -
TRUCK-LITE RIGHT ANGLE MARKER CLEARANCE PLUG
• 16GA GPT Wire, PL-10 Right Angle, .156 Bullet Terminal/Ring Terminal, 6"Out of stock -
FORD OEM TAIL LIGHT PIGTAIL -
Adapter Plug
• 6" Long, Female Pin to 90° Male Pin Lamp Termination
• For use with 4" round and oval, S / T / T lamps -
Sealed Marker Lamp Pigtail
• 6" Long, Chassis Ground
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring system
• Double seal resists corrosion
• Fits 2", and 2 1/2" round and beehive-style LED -
Adapter Plug for Hard-Shell Connector
• 6" Long, Female-Pin to Hard-Shell Connector
• For use with 4" round and oval S / T / T lamps -
Turtleback® II Double-Seal Lamp Pigtails
• 6" Long, Ground Return, Standard .180 Male
• Pigtail for 4680-, 4684-, 4686- and 4687- series lamps
• All connections fit under lamps
• Factory-molded plugs for use -
Thin-Line LED Pigtails
• 5" Long, Chassis Ground System
• UBS sealing ring
• Uses patented double-seal protection
• Grease grooves for additional sealing protection
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring system
TRUCK-LITE LED STOP/TURN/TAIL ADAPTER PLUG
• Converts One LED Fit 'n Forget Stop/Tail/Turn Plug Into Two
• 16GA GPT Wire, Fit 'n Forget S.S., 3 Position Connector 282105, 12"
ECCO REMOTE STROBE SYSTEM CABLE 30FT.
• Use with 9660 Series Power Supply
• Pre-Attached AMP Connectors
Turtleback II Double-Seal Light Pigtail
• All connections fit under lamps
• Pigtail for 4680-, 4684-, 4686- and 4687- series lamps
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring
GROTE DIMMER SWITCH SOCKET 3-WIRE
• 3 Wire 18 Gauge 12" Long
• Snap-In Locking Ears
PETERSON 2-WIRE HARD SHELL LED PLUG
• Weatherproof AMP To 2, .180 Bullet Terminals
Sentry Lamp Pigtail
• 6" Long, Ground Return,Slim-Line .180 Male
• Sealed plug-in pigtail for 5206-, 5202-, and 5306- lamps
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring system
• O-ring helps prevent
GROTE THREE-WIRE PLUG-IN PIGTAILS FOR MALE PIN LAMPS
• 11" Long, Chassis Ground, Blunt Cut Wire
• Dual function for S / T / T lamps
• O-ring seal resists
Two-Wire Plug-In Pigtails for Female-Pin Lamps
• 10" Long, Chassis Ground, Standard .180 Male
• Single function
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring system
• Includes dummy pin to help guide
TRUCK-LITE PACKARD TYPE BACK-UP/LICENSE/STOP/TURN/TAIL HARNESS
• 21" Single Plug 18ga Wire, Stripped End, Ring Terminal
• Packard Connector 1265862
TRAILER WIRING 8" BLUNT CUT WIRE
TRUCK-LITE FIT'N FORGET STOP/TURN/TAIL PLUG
• Female PL-3, Fit 'n Forget S.S., 8"
• 16GA GPT Wire; Tin Plated Brass Terminals
TRUCK-LITE 7" LOW PROFILE MARKER CLEARANCE PLUG
• 16GA GPT Wire, PL-10, Stripped End/Ring Terminal