Pigtails, Sockets & Equalizers
-
TRUCK-LITE LED FIT 'N FORGET MARKER CLEARANCE PLUG
• 16GA GPT Wire, Heat Shrink Splices, 5" - Triple-Lamp ID Harnesses
• 54" Long, Universal Triple-ID Jumper (31"x12"x12")
• Designed for use with ULTRA-BLUE-SEAL® wiring system
• Factory-molded plugs resist moisture and corrosion
• Slim-line .180 male terminations at power end - Sealed Marker Lamp Pigtail
• 6" Long, Ring Terminal Ground, Blunt Cut Wire
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring system
• Double seal - Two-Wire Plug-In Pigtails for Female-Pin Lamps
• 10" Long, Ground Return, Slim-Line .180 Male
• Single function
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring system
• Includes dummy pin to help guide - Electrical Connector/Pigtail
• Slim-Line Under Light Male To Slim-Line Under Light Double Female -
TRUCK-LITE FIT 'N FORGET CLEARANCE MARKER PLUG
• 16GA GPT Wire, .180 Bullet Terminal, 5" -
MAXXIMA 3-PIN 90° PLUG-IN PIGTAIL FOR FEMALE-PIN LAMPS
• 12" Long, Chassis Ground, Blunt Cut Wires
• Dual function for S / T / T lamps -
TRUX TRIPLE FEMALE BULLET PLUG WIRE HARNESS
• 16 Gauge Wire 6" Spacing Between Plugs -
MAXXIMA TWIN.180 FEMALE BULLET CONTINUOUS WIRE HARNESS
• 12" Leads, 100 Connectors Per Roll
• Red PVC Housing, Non-Corrosive - WELDON 3 WIRE PLUG ASSEMBLY
- 6" Packard Connector Pigtail
• Sealed plug-in style pigtail - Hard-Shell Connector Pigtail 10"
• Standard 4-Pin Hard Shell connector for the 4-in-1 Stop Tail Turn Light with integrated back-up
• Male Pin connection to vehicle - Hard-Shell Connector Pigtail 10"
• Standard 4-Pin Hard Shell connector for the 4-in-1 STT with integrated back-up
• Female Pin connection to vehicle - 2 Wire Plug Assembly
• 5150/5180/8020 Series Lamps - Sealed, Economy Clearance / Marker Lamp Pigtail
•6 3/4" Long w/ 3/8" Wire Strip
- Hard-Shell Connector Pigtail
• 11" Long, Chassis Ground, Blunt Cut Wire
• Mates with competitive lamps using Amp Superseal® 1.5 series connectors - Clearance / Marker Pigtail
• 6" Long, Chassis Ground, Slim-Line .180 Male
• Fits 4674 series clearance / marker lamps, and 4709 and 6029 / 6030 license and utility lamps
• Factory-molded plugs - Stop / Tail / Turn Three-Wire Plug-In Pigtails for Female Pin Lamps
• 11 1/2" Long, Chassis Ground, Blunt Cut Wires
• Dual function for S / T / T lamps
• Factory-moldedOut of stock -
TRUCK-LITE SIGNAL-STAT BACK-UP/LICENSE/STOP/TURN/TAIL HARNESS
• 1 Plug, 29" 16GA Packard Connector, 36" Lamp to Lamp
• Jumper Harness For 5023/5024 Combo LampNavistar, Volvo & Freightliner Trucks -
TRUCK-LITE LED STOP/TURN/TAIL PLUG
• 16 GA GPT Wire, Fit 'N Forget S.S.
• .180 Bullet Terminal, 8" - Electrical Connector/Pigtail
• 24" Rear tracking lamp jumper -
TRUCK-LITE RIGHT ANGLE STOP/TURN PLUG
• 16GA GPT Wire, 11", Right Angle PL-2
• Stripped End/Ring Terminal, 11" -
TRUCK-LITE FIT 'N FORGET MARKER CLEARANCE PLUG
• 16GA GPT Wire, .180 Bullet Terminal/Ring Terminal, 5" -
TRUCK-LITE LED FIT'N FORGET STROBE PLUG KIT
• 16GA GPT Wire, Fit 'n Forget S.S.
• Stripped End/Ring Terminal, 8.5" -
TRUX SINGLE FEMALE BULLET PLUG WIRE HARNESS
• 16 Gauge Wire 8" Spacing Between Plugs -
PETERSON 6" RIGHT ANGLE LED MARKER PLUG
• Two wire 2-prong PL-10 molded plastic plug -
PICO HEADLIGHT CONNECTOR-UNIVERSAL
• Weather-Pack Seal Connector
• 2-Wire 12ga
• For Use With H1/H3 Halogen Bulb Socket -
TRUCK-LITE FIT'N FORGET MARKER/CLEARANCE PLUG
• 4" 16 Gauge GPT Wire, Female PL-10, Tin-Plated Brass Terminals
• Used To Adapt LED Lamps To Conventional Plug Harness Systems -
TRUCK-LITE STOP/TURN/TAIL REPLACEMENT PLUG
• 16 GA GPT Wire, LED Fit 'n Forget S.S.
• Replaces Damaged Plugs/Used For Retrofitting - WELDON 2 WIRE PLUG ASSEMBLY