Clearance & Marker Lamps

Two-Bulb Square-Corner Clearance / Marker Lamp
• Amber, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at a

SuperNova LED Clearance / Marker Lamp
• Amber Lens, Yellow Body, Polycarbonate
• Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal

SuperNova® Low-Profile LED Clearance / Marker Lamp
• Amber, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lens

Oval Torsion Mount III Side Turn/Marker Lamp
• Amber, Polycarbonate
• Torsion Mount® III, Gel-Mount® bulb cradle design minimizes bulb vibration
• Extended dome for added visibility from front and rear
• Fits standard

Sentry Sealed Marker/Side Turn Lamp
• Amber, Black Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded dock applications
• Sentry lamp

Sealed Turtleback II Clearance / Marker Lamp - ABS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®

Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when

SuperNova 2" LED Clearance Marker Light-AMBER
• Hermetic lens-to-housing seal
• Fits all popular mountings and grommets
• Fully sealed electronics using encapsulant potting
• Meets PC function when mounted

Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene

2" Round Clearance Marker Light-Amber
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

School Bus Rectangular Marker Light-AMBER
• Fits most school bus applications
• OEM-style w/Included mounting pad

Flush-Mount Cab Marker Light-AMBER
• Polycarbonate Hermetic lens to housing seal

School Bus Wedge LED Marker Light-AMBER
• Potted circuit board
• Mounting gasket included
• Blunt-cut, hardwire termination
• Hermetically sealed construction
• 15 Diodes in both red and Amber

2 1/2" Oval LED Clearance / Marker Lamp
• Amber, Polycarbonate
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached

SuperNova 2 1/2" LED Clearance / Marker Lamp
• Amber, ABS Polycarbonate
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Uses same UBS double-seal pigtail as incandescent version for a

Clearance Marker with Built-In Reflector-AMBER
• Corrosion-resistant body
• Flange mounting & built-in reflector
• Boat, snowmobile, trailer, and RV

SuperNova Flush-Mount LED Cab Marker Light
• Hermetic lens to housing seal
• Potted for total circuit board protection
• Sealed hard-wire terminations with UBS molded .180 bullet terminals

SuperNova Oval LED Side Turn Marker Lights
• Stainless Steel Theft-Resistant Flange
• Male pin and hard shell connection options
• Flashing turn signal is visible to driver during operation

2 1/2" Oval LED Clearance / Marker Lamp - Yellow
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached to

2 1/2" Clearance / Marker Lamp
• Amber, Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• 12-volt

2" Clearance / Marker Lamp
• Amber, Polycarbonate
• Hermetic lens-to-housing seal
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• 12-Volt version features a 12,000+ hour bulb
• All versions

Die-Cast, Aluminum Clearance / Marker Lamp
• Amber Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy

Sealed Turtleback® II Clearance / Marker Lamp / REFLEX LENS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail

SuperNova® Sealed Turtleback® II LED Clearance / Marker Lamp / BUILT-IN REFLECTOR
• Amber, Polycarbonate (Optic) / Acrylic (Reflex)
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid-brass terminals

MicroNova LED Clearance / Marker Lamp
Amber w/Grommet, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant potting

2" Clearance / Marker Lamp
• Amber, Polycarbonate
• Hermetic lens-to-housing seal
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• 12-Volt version features a 12,000+ hour bulb
• All versions

Amber, Clearance/Marker Replacement Lens
Fits Light Assy G4602, G4603
• Length: 4" (101.6mm)
• Width: 2" (50.88mm)
• Thickness: 0.76" (19.30mm)

Amber, Hi Count® 2 1/2”³ LED Clearance / Marker
• Polycarbonate
• Hermetic lens-to-housing seal
• Uses the same UBS double-seal

Amber, Hi Count® Turtleback® II LED Lamp
• Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Molded bullet with chassis ground-ring terminal connection
• Shock absorbing, heat-resistant lens