Motors

WINCH MOTOR 12V 2.28HP CW/CCW
• 0.625" Diameter Shat with Keyway
• 3.00" Raised Ring Diameter on Drive End Frame
• 1.75" Shaft Length

WINCH MOTOR 12V SLOTTED 3.4HP CW/CCW
• Drive End Plate Not Included
• Center Terminal is Ground

WINCH MOTOR 12V 2.28HP CW/CCW
• 0.750" Shaft Diameter with Keyway
• Shaft Length 1.75"
• Raised Alignment Ring 3.00" Diameter

WINCH MOTOR 12V TANG 4.5HP CW/CCW 1900/3700 RPM
• Shaft has Two Flats with 0.250" Hole at End
• Shaft Length 1.90"
• Shaft Diameter 0.520"

WINCH MOTOR 24V 3/4""SHAFT W/KEY 3.48HP CW/CCW

MOTOR 12V SLOTTED 3.4HP CW/CCW

WINCH MOTOR 12V 3.4HP CW/CCW
• With Ground Stud
• Shaft Length 1.75" with Keyway
• Shaft Diameter 0.750"

WINCH MOTOR 12V TANG 4.5HP CW/CCW
• Shaft 0.52"Diameter, With Two .380 Flats, 1/4" Hole on End

WINCH MOTOR 12V 2.28HP CW/CCW
• 0.625" Shaft Diameter with Keyway
• Shaft Length 1.65"
• Raised Alignment Ring 3.00" Diameter