Motors
- WINCH MOTOR 12V 2.28HP CW/CCW
• 0.625" Diameter Shat with Keyway
• 3.00" Raised Ring Diameter on Drive End Frame
• 1.75" Shaft LengthSanta Anita Cranes
Venco Venturo Cranes - MOTOR PM 12/24V SPIRAL SHAFT 0.67HP CW/CCWAutocrane
Dunmore Cranes - PM MOTOR 24V CW/CCW
• Shaft Length 1.50" with Keyway
• Shaft Diameter 0.625"Mobile Cranes
Winches - WINCH MOTOR 12V SLOTTED 3.4HP CW/CCW
• Drive End Plate Not Included
• Center Terminal is GroundSanta Anita CranesOut of stock - WINCH MOTOR 12V 2.28HP CW/CCW
• 0.750" Shaft Diameter with Keyway
• Shaft Length 1.75"
• Raised Alignment Ring 3.00" DiameterBraden Winches
Cam Industries
Desert Dynamics - WINCH MOTOR 12V TANG 4.5HP CW/CCW 1900/3700 RPM
• Shaft has Two Flats with 0.250" Hole at End
• Shaft Length 1.90"
• Shaft Diameter 0.520"Ramsey WinchesOut of stock - WINCH MOTOR 12V 3.3HP CW/CCW 1700/3700 RPM
• Shaft Length 1.75" with Keyway
• Shaft Diameter 0.625"Santa Anita Cranes
Venco Cranes - WINCH MOTOR 24V 3/4""SHAFT W/KEY 3.48HP CW/CCWRamsey WinchesOut of stock
- WINCH MOTOR PM 12V KEYWAY CW/CCW
• 5/8" X 3" Shaft
• Maybe Supplied without FlangeMY-TE WinchesOut of stock - MOTOR 12V SLOTTED 3.4HP CW/CCWBarnes Hydraulics
Hahn Hydraulics
MTE HydraulicsOut of stock - WINCH MOTOR 12V 3.4HP CW/CCW
• With Ground Stud
• Shaft Length 1.75" with Keyway
• Shaft Diameter 0.750"Ramsey WinchesOut of stock - MOTOR PM 12V TANG CW/CCWWarn Winches
- WINCH MOTOR 12V TANG 4.5HP CW/CCW
• Shaft 0.52"Diameter, With Two .380 Flats, 1/4" Hole on EndRamsey Winches
- WINCH MOTOR 12V 2.28HP CW/CCW
• 0.625" Shaft Diameter with Keyway
• Shaft Length 1.65"
• Raised Alignment Ring 3.00" DiameterRedwood Cranes
Ruger EquipmentOut of stock