Stop / Tail / Turn

SuperNova® 4” 10-Diode Pattern LED S/T/T Lamp
• Red w/ Gray Theft-Resistant Flange
• Acrylic / ABS
• Lens design spreads

SuperNova 4" Full-Pattern LED Stop Tail/Turn/Light
• Hermetic lens-to-housing seal
• Potted for total circuit board protection
• Advanced pin connection system uses tin-plated, solid brass pin terminations

7” LED Stop/Tail/Turn Lamp, Red, Stop, Tail, Turn Lamp w/Reflex
•Polycarbonate
•Encapsulant potting provides protection for the circuit board
•UV-protected lenses
•Male .180 bullet connectors
•Flat-back installation (no cut-outs required)

Grote Select, Female-Pin Termination
• Amber, ABS / Acrylic
• Faster light-on response time provides greater

Stop/Tail/Turn Replacement Lens, Red
• Thickness: 0.46" (11.88mm)
• Diameter: 4.23" (107.44mm)

Amber Stop/Tail/Turn Replacement Lens
Fits Light Assy 53000, 56000
• Thickness: 4.11" (104.52mm)
• Diameter: 0.95" (24.25mm)

Red, Hi Count® 4”³ LED Stop/Tail/Turn
• Polycarbonate / Acrylic
• Standard female connection accepts all popular plug-in connectors
• Concentric,

Stop Tail Turn 4" Light Power Module-RED
• Includes reflector
• Right or left hand application
• Heavy-gauge steel plate and can
• Torsion Mount II 4" round sealed lamps

7" Tail Turn Replacement Lense w/Arrow

SuperNova 4" 10-Diode Pattern LED Stop/Tail/Turn
• Stainless Steel Theft-Resistant
• Hermetic lens-to-housing seal
• Potted for total circuit board protection
• Uses same UBS pigtail as male pin incandescent

7" School Bus Replacement Lens-AMBER
• Fits 50132 & 56072

RV, Marine & Utility Replacement Lenses, Trailer Lighting Kit, Red
• Thickness: 0.5" (12.7mm)
• Diameter: 3.62" (91.94mm)

Red Replacement Lens
Fits Light Assy 50852
• Thickness: 0.5" (12.7mm)
• Diameter: 3.62" (91.94mm)

Torsion Mount II 4" Stop, Tail, Turn Light
• Gel-Mount® Heavy-duty bulb cradle design
• O-ring seal and male pin design reduce corrosion
• Locking tabs ensure solid pigtail connection

7" School Bus Light-AMBER/BLACK
• Single Contact w/Arrow Lens
• Flush mount
• Rugged housing w/blunt cut wires

Stainless Steel Lamp
• Red, Polycarbonate
• Easy snap-on lens
• Rugged stainless-steel construction

SuperNova 4” 10-Diode Pattern LED S/T/T Lamp
• Red w/ White Theft-Resistant Flange
• Acrylic / ABS
• Lens design spreads

SuperNova 4” 10-Diode Pattern LED S/T/T Lamp, Red
• Grommet Mount, Acrylic / ABS
• Lens design spreads light for maximum dispersion

SuperNova 4” NexGen LED S/T/T, Male Pin
• Red, Acrylic / ABS
• Less current draw than standard incandescent lamps leaving more power available

SuperNova® 4” NexGen LED S/T/T, Hard Shell
• Red, Acrylic / ABS
• Less current draw than standard incandescent lamps leaving more power available

SuperNova 4” 10-Diode Pattern LED S/T/T Lamp, Grommet Mount
• Red, Acrylic / ABS
• Encapsulant potting for total circuit-board protection
•

Arrow Lens 7" Single-Face Lamp-AMBER
• Steel/Acrylic
• Two-stud or bracket mounting
• Heavy-gauge formed steel housing
• Amber arrow design for rear turn only

SuperNova 4" NexGen LED Stop/Tail/Turn Light
• Less current draw than standard incandescent lights, leaving more power available to other vehicle systems
• Uses existing pigtails and wiring for cost-effective

7" Double-Face Pedestal Light-Red/Amber Turn
• Finish: Baked Black Enamel
• Voltage Amp: 12V / 2.1A (I)
• Bulb: 1156, 32 CP

4" Round LED Stop Tail Turn Light-Red
• Sealed lamp design
• 10-diode LED pattern
• Fits all popular mounting accessories
• Standard female pin connector

Torsion Mount II 4" Stop Tail Turn Light-RED
• Locking tabs ensure solid pigtail connection
• Heavy-duty bulb provides greater reliability
• Torsion Mount II, Gel-Mount bulb cradle design
•

Steel Frame Lamp, DOUBLE CONTACT
• Red, Steel/Acrylic
• Rugged steel construction
• Easy snap-on lens
• 2-wire pigtail

Torsion Mount II 4" Stop/Tail/Turn Light
• Heavy-duty bulb provides greater reliability
• Locking tabs ensure solid pigtail connection
• O-ring seal and male pin design reduce corrosion
• Torsion

4" Round Tail/Turn Light-Amber
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

Torsion Mount 4" Stop Tail Turn Light
• Heavy-duty bulb provides greater reliability
• Locking tabs ensure solid pigtail connection
• O-ring seal and male pin design reduce corrosion
•