Stop / Tail / Turn
- Stop/Tail/Turn Replacement Lens, Red
• Thickness: 0.46" (11.88mm)
• Diameter: 4.23" (107.44mm)
- Stop Tail Turn 4" Light Power Module-RED
• Includes reflector
• Right or left hand application
• Heavy-gauge steel plate and can
• Torsion Mount II 4" round sealed lampsTRUCK-LITE 91 SERIES 7" INCANDESCENT STOP/TURN/TAIL LIGHT - RED
• 12V Round Single Bulb, Incandescent Dual Filament
• PL-3 Plug, 4 Screw MountHigh Impact Polycarbonate Lens-RED
• Fits 1080 Series 7" Halogen Warning Lamp
• Diameter 7in(178 mm) Depth 2.0in(50.8 mm)
• Gasket Not IncludedOut of stockTRUCK-LITE 40 SERIES STOP/TURN/TAIL LIGHT - RED
• 12V, Round Incandescent, Single Bulb, PL-3
• Polycarbonate Lens, Grommet MountTRUCK-LITE SCHOOL BUS ROUND INCANDESCENT STOP/TURN/TAIL LIGHT - RED
• 12V Single Bulb, Hardwired, Stripped End, Diamond Shell
• Bulb Replaceable, 4-Screw Surface MountRV, Marine & Utility Replacement Lenses, Trailer Lighting Kit, Red
• Thickness: 0.5" (12.7mm)
• Diameter: 3.62" (91.94mm)
Red Replacement Lens
Fits Light Assy 50852
• Thickness: 0.5" (12.7mm)
• Diameter: 3.62" (91.94mm)
Torsion Mount II 4" Stop, Tail, Turn Light
• Gel-Mount® Heavy-duty bulb cradle design
• O-ring seal and male pin design reduce corrosion
• Locking tabs ensure solid pigtail connection2500 Series Stop/Turn/Tail Lamp Assembly
• High Impact Polycarbonate Lens
• Single-Plug ConnectorStainless Steel Lamp
• Red, Polycarbonate
• Easy snap-on lens
• Rugged stainless-steel construction
7" Stop Light Round Black Base-Red
• Diameter 7in(178 mm) Depth 2.07in(52.4 mm)
• 12 Volt 2.1/.59 AmpsOut of stockTorsion Mount II 4" Stop Tail Turn Light-RED
• Locking tabs ensure solid pigtail connection
• Heavy-duty bulb provides greater reliability
• Torsion Mount II, Gel-Mount bulb cradle design
•Steel Frame Lamp, DOUBLE CONTACT
• Red, Steel/Acrylic
• Rugged steel construction
• Easy snap-on lens
• 2-wire pigtailTorsion Mount II 4" Stop/Tail/Turn Light
• Heavy-duty bulb provides greater reliability
• Locking tabs ensure solid pigtail connection
• O-ring seal and male pin design reduce corrosion
• TorsionTorsion Mount 4" Stop Tail Turn Light
• Heavy-duty bulb provides greater reliability
• Locking tabs ensure solid pigtail connection
• O-ring seal and male pin design reduce corrosion
•7" School Bus Replacement Lens-RED
• Fits 50132 & 560727" Acrylic Lens 1010 Series-RedOut of stock7" School Bus Light Stop/Tail/Turn-RED
• Flush mount, Steel/Acrylic
• Rugged housing w/ blunt cut wires
• 12V / 2.1A (I, S)/ .59A (T)4" Two-Stud Stop Tail Turn Lights
• Snap-on lens, w/out License Window
• Rubber compression-sealed pigtail
• Removable studs for school bus application
• Voltage Amp: 12V / 2.1A (I,4" Die-Cast Single-Face Lamp
• Red, Chrome-Plated, Die-cast/Acrylic
• Less than 75 sq cm of effective, projected luminous lens area
• For use on vehicles under 80" wide
• Wire exit includes a grommetOut of stockPETERSON 4" INCANDESCENT STOP/TURN/TAIL LIGHT W/CLEAR HOUSING
• Clear back is ideal to illuminate service body compartments
• Features extra wide, spin-welded, tongue-and-groove lens seal4" Two-Stud Stop Tail Turn Light-RED
• Snap-on lens, w/License Window
• Rubber compression-sealed pigtail
• Removable studs for school bus application
• Voltage Amp: 12V / 2.1A (I, S)/Grote Select, Female-Pin Termination
• Red, ABS / Acrylic
• Faster light-on response time provides greaterRed Stop/Tail/Turn Replacement Lens
• Thickness: 3.62" (91.194mm)
• Diameter: 0.5" (12.7mm)
Out of stockRed, Stop/Tail/Turn Replacement Lens
Fits Light 53000, 56000
• Thickness: 4.11" (104.52mm)
• Diameter: 0.95" (24.25mm)
Out of stockHigh Impact Polycarbonate Lens-RED
• Fits 2500 Series 4.19" Stop, Turn & Tail Lamps
• Snap & Lock LensOut of stock7" Stop/Turn/Tail Round Black Base-Red
• Diameter 7in(178 mm) Depth 2.07in(52.4 mm)
• 12 Volt 2.1/.59 AmpsOut of stock