Stop / Tail / Turn
-
OPTRONICS 4" SEALED 21 DIODE LED TURN/PARKING-RED
• Waterproof, Corrosion Resistant
• Grommet Mount, 3-prong plug
• LED light draws 0.30/0.10 amps at 12 volts -
4” 21 LED Red Lens Sealed Stop/Tail/Turn Light
• Flange Mount, PL-3 connection
• Polycarbonate lens and housing
• VOLT/AMP: 12.8VDC - .375A Stop/Turn, .145A Tail -
4” 21 LED Red Sealed Stop/Tail/Turn Light
• Flange Mount, weathertight connection
• Polycarbonate lens and housing
• VOLT/AMP: 12.8VDC - .375A Stop/Turn, .145A Tail -
4” Round 21 LED Red Stop/Tail/Turn Light
• Grommet Mount in any 360 degree position
• Sonically sealed, waterproof
• Polycarbonate lens and housing
• VOLT/AMP: 12.8VDC - .375A -
6” 6 LED Recessed Oval Sealed Light
• Red Lens Stop/Tail/Turn Light
• Grommet Mount in any 360 degree position
• Sonically sealed, Weathertight Connection
• Polycarbonate lens and housing
6” Oval 21 LED Stop Tail Turn Surface Mount
• Flange surface mount–no panel cut-out required
• Sonically sealed, Mount in any 360 degree position
• Red Polycarbonate lens and
Sealed Rectangular LED Light
• Red stop/turn/tail light, PL-3 connection
• Polycarbonate lens and housing Sonically sealed, waterproof
• Miro-Flex™ combines smooth lens and faceted reflector
• VOLT/AMP 12.8VDC -
Thinline Sealed 11 LED Stop/Turn/Tail Light
• Polycarbonate lens and housing replaceable, snap-on red lens
• Surface mount on 12-7/8” centers
• Meets SAE S2T2I6 for over 80” wideOut of stock
OPTRONICS 4” 7 LED SEALED STOP/TAIL/TURN LIGHT
• Grommet Mount in any 360 degree position
• Sonically sealed, PL-3 connection
• Polycarbonate lens and housing
6" Oval 21 LED Red Sealed Park/Turn Light
• Grommet Mount in any 360 degree position
• Sonically sealed, PL-3 connection
• Polycarbonate lens and housing
• VOLT/AMP: 12.8VDC -
6” 6 LED Recessed Oval Sealed Light
• Red Lens Stop/Tail/Turn Light
• Grommet Mount in any 360 degree position
• Sonically sealed, PL-3 connection
• Polycarbonate lens and housing
OPTRONICS 4” 10 LED SEALED STOP/TAIL/TURN-RED
• Sonically sealed, waterproof
• Grommet Mount in any 360 degree position
• Polycarbonate lens and housing, PL-3 connection
OPTRONICS 4" SEALED LED STOP/TURN/TAIL-RED
• Sonically sealed, waterproof
• Mount in any 360 degree position
• Accepts standard PL-3 connector
OPTRONICS 4” 7 LED SEALED STOP/TAIL/TURN LIGHT
• Grommet Mount in any 360 degree position
• Sonically sealed, Weathertight Connection
• Polycarbonate lens and housing
39 LED Combination Tail Light-Stud mount-LH
• Stop/Turn/Tail light w/6-LED back-up light
• Driver side light includes 3-LED license light
• Hard wired; wire exits through back of housing
•
Streamline LED Stop Turn Tail Light
• Sonically sealed, waterproof
• Low profile design–only 1-3/8” high x 1” thick
• Surface mount on 16-1/8”?? centers
• Hard wired with separate
Surface Mount LED Combination Stop/Turn/Tail & Back-Up Light
• Sonically sealed, waterproof
• Low profile design–only 1/2” thick
• Surface mount on 9-11/16” centers
• Hard wired with separate ground
Thinline Sealed LED Stop/Turn/Tail Lights
• Red Polycarbonate lens and housing
• Sonically sealed, waterproof
• Low profile design–only 5/8” thick
• Surface mount on 14-1/8” centers
• Hard wired
6-1/2" Sealed 10 Diode LED Stop/Turn/Tail-RED
• Waterproof, Corrosion Resistant
• Flange Mount Hard Wire
• Dimensions: 7-9/16" L x 3-5/16" W x 3/4" D
• Light draws 0.243/.046 amps
OPTRONICS MIRO-FLEX 6” OVAL SEALED LED STT-RED
• Sonically sealed, waterproof
• Mount in any 360 degree position
• Hardwire deisign
4” 21 LED Sealed Stop/Tail/Turn Light
• Red Lens Stop/Tail/Turn Light
• Grommet Mount in any 360 degree position
4” Oval 21 LED Red Lens Stop/Tail/Turn Light
• Flange Mount, PL-3 connection
• Polycarbonate lens and housing
• VOLT/AMP: 12.8VDC - .59 Stop/Turn, .295A Tail
4” Oval 21 LED Red Lens Stop/Tail/Turn Light
• Flange Mount, Weathertight Connection
• Polycarbonate lens and housing
• VOLT/AMP: 12.8VDC - .59 Stop/Turn, .295A Tail
6" 21 LED Oval Sealed Stop/Turn/Tail Light
• Unique mirrored reflector
• Sonically sealed, waterproof
• Polycarbonate lens and housing
• Grommet Mount in any 360 degree position
• Accepts
4" 6 LED Round Stop/Turn/Tail Light
• Unique mirrored reflector
• Sonically sealed, waterproof
• Polycarbonate lens and housing
• Grommet Mount in any 360 degree position
• Accepts standard
36 LED Combination Tail Light-Stud mount-RH
• Stop/Turn/Tail light w/6-LED back-up light
• Hard wired; wire exits through back of housing
• VOLT/AMP 12.8VDC - Tail .19A, Stop/Turn .30A, Back-up
4" LED Combination Stop/Turn/Tail/Back-Up Light
• DOT-compliant back-up light built into stop/turn/tail light
• Sonically sealed, weathertight connections
• Recess flange mount design for secure installation
Thinline LED Stop/Turn/Tail Lights
• RED Polycarbonate lens and housing
• Sonically sealed, waterproof
• Low profile design–only 5/8” thick
• Surface mount on 14-1/8” centers
• Hard wired with
OPTRONICS 4” ROUND SEALED STOP/TAIL/TURN-RED
• Sonically sealed, waterproof
• Mount in any 360 degree position
• Weathertight plug connection
6" Oval 21 LED Sealed Park/Turn Light
• Red Lens parking/rear turn
• Grommet Mount in any 360 degree position
• Sonically sealed, weathertight connection
• Polycarbonate lens and housing