Stop / Tail / Turn

SuperNova 4" NexGen LED Stop/Tail/Turn Light
• Grommet Mount, Auxiliary, Male Pin
• Resembles incandescent light to alleviate theft concerns
• Uses existing pigtails and wiring for cost-effective retrofit
•

4" Round LED Stop Tail Turn Light with Integrated Backup
• 4-Pin w/ Stainless Steel, Hard Shell Termination
• Innovative patented design combines all Stop Tail Turn and Back-up functions

7" School Bus Replacement Lens-RED
• Fits 50132 & 56072

4" LED Stop Tail Turn Light
• Concentric, high-count 24 diode design
• Fits all popular mountings and grommets
• Standard female connection accepts all popular plug-in connectors

Torsion Mount II 4" Stop/Tail/Turn Light
• Heavy-duty bulb provides greater reliability
• Locking tabs ensure solid pigtail connection
• O-ring seal and male pin design reduce corrosion
• Torsion

4" Round Tail/Turn Light-Amber
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

Torsion Mount 4" Stop Tail Turn Light
• Heavy-duty bulb provides greater reliability
• Locking tabs ensure solid pigtail connection
• O-ring seal and male pin design reduce corrosion
•

Torsion Mount II 4" Stop Tail Turn Light-RED
• Locking tabs ensure solid pigtail connection
• Heavy-duty bulb provides greater reliability
• Torsion Mount II, Gel-Mount bulb cradle design
•

4" Stop/Tail/Turn Lamp
• Amber, Polycarbonate
• Standard female connection
• Fits all competitive pigtails, brackets and grommets
• Hermetic lens-to-housing seal

4" Die-Cast Single-Face Lamp
• Red, Chrome-Plated, Die-cast/Acrylic
• Less than 75 sq cm of effective, projected luminous lens area
• For use on vehicles under 80" wide
• Wire exit includes a grommet

SuperNova 4” 10-Diode Pattern LED S/T/T Lamp
• Amber, Grommet Mount
• Acrylic / ABS
• Lens design spreads light for

SuperNova 4” 10-Diode Pattern LED S/T/T Lamp
• Red w/ Black Theft-Resistant Flange
• Acrylic / ABS
•

7”³ LED Arrow Turn Lamp
• Amber, Polycarbonate
• Large arrow pattern makes it easier for road traffic to identify turning vehicles
•

SuperNova 4” 10-Diode Pattern LED S/T/T Lamp, Stainless-Steel Snap-In Flange
• Red, Acrylic / ABS
• Lens design spreads light for maximum dispersion

4”³ Hi Count, Red and Amber
• Acrylic/Die Cast
• Attractive multiple-diode design
• Heavy-duty housing with hard-wired connection for variable

SuperNova 4" 10-Diode Pattern LED-AMBER
• Lens design spreads light for maximum dispersion
• Potted for total circuit board protection
• Hermetic lens-to-housing seal
• Uses same UBS pigtail

4" Round LED Stop/Tail/Turn Light with Integrated Backup
• Innovative patented design combines all Stop Tail Turn and Back-up functions into one industry standard size lamp.
• A new robust

7" LED Front Turn, Single Function w/Reflex
• Male .180 bullet connectors
• UV-protected lenses, install using #10 screws
• Surface mount installation (no cut-outs required)
• Encapsulant potting provides

4" Two-Stud Stop Tail Turn Lights
• Snap-on lens, w/out License Window
• Rubber compression-sealed pigtail
• Removable studs for school bus application
• Voltage Amp: 12V / 2.1A (I,

SuperNova 4" 10-Diode Pattern LED Stop Tail Turn Light
• Black Theft-Resistant Flange, Male Pin, Auxiliary Turn
• Hermetic lens-to-housing seal
• Potted for total circuit board protection
• Lens

7" School Bus Light Stop/Tail/Turn-RED
• Flush mount, Steel/Acrylic
• Rugged housing w/ blunt cut wires
• 12V / 2.1A (I, S)/ .59A (T)

SuperNova 4" Full-Pattern LED Stop/Tail/Turn Light
• Hermetic lens-to-housing seal
• Potted for total circuit board protection
• Advanced pin connection system uses tin-plated, solid brass pin terminations

4" Two-Stud Stop Tail Turn Light-RED
• Snap-on lens, w/License Window
• Rubber compression-sealed pigtail
• Removable studs for school bus application
• Voltage Amp: 12V / 2.1A (I, S)/

SuperNova 4" Full-Pattern LED-RED
• Stop, Tail, Turn Light
• Hermetic lens-to-housing seal
• Potted for total circuit board protection
• Advanced pin connection system uses tin-plated, solid brass

SuperNova 24V 4" Full-Pattern LED-RED
• Stop, Tail, Turn Light
• Hermetic lens-to-housing seal
• Potted for total circuit board protection
• Advanced pin connection system uses tin-plated, solid

Grote Select, Female-Pin Termination
• Red, ABS / Acrylic
• Faster light-on response time provides greater

SuperNova® 4”³ NexGen™ LED S/T/T, Hard Shell
• Amber, Acrylic / ABS
• Less current draw than standard incandescent lamps leaving more power available

Red Stop/Tail/Turn Replacement Lens
• Thickness: 3.62" (91.194mm)
• Diameter: 0.5" (12.7mm)

Red, Stop/Tail/Turn Replacement Lens
Fits Light 53000, 56000
• Thickness: 4.11" (104.52mm)
• Diameter: 0.95" (24.25mm)