Pigtails, Sockets & Equalizers
-
Adapter Plug for Hard-Shell Connector
• 6" Long, Female-Pin to Hard-Shell Connector
• For use with 4" round and oval S / T / T lamps -
TRUCK-LITE LED STOP/TURN/TAIL ADAPTER PLUG
• Converts One LED Fit 'n Forget Stop/Tail/Turn Plug Into Two
• 16GA GPT Wire, Fit 'n Forget S.S., 3 Position Connector 282105, 12" -
ECCO REMOTE STROBE SYSTEM CABLE 30FT.
• Use with 9660 Series Power Supply
• Pre-Attached AMP Connectors -
GROTE DIMMER SWITCH SOCKET 3-WIRE
• 3 Wire 18 Gauge 12" Long
• Snap-In Locking Ears -
Sentry Lamp Pigtail
• 6" Long, Ground Return,Slim-Line .180 Male
• Sealed plug-in pigtail for 5206-, 5202-, and 5306- lamps
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring system
• O-ring helps prevent -
GROTE THREE-WIRE PLUG-IN PIGTAILS FOR MALE PIN LAMPS
• 11" Long, Chassis Ground, Blunt Cut Wire
• Dual function for S / T / T lamps
• O-ring seal resists -
TRUCK-LITE FIT'N FORGET STOP/TURN/TAIL PLUG
• Female PL-3, Fit 'n Forget S.S., 8"
• 16GA GPT Wire; Tin Plated Brass Terminals -
Three-Wire 90º Pigtail for Female Pin Lights
• 90 degree construction for reduced clearance applications
• Dual Function for Stop Tail Turn Lights
• Ring Terminal for Chassis Ground -
GROTE TAIL LIGHT CONNECTOR SOCKET
• 3 Wire 18 Gauge 8" Wire
• For use with 1016, 1034, 1154, 1157 bulbs
• 90° Angle Low Profile -
PETERSON 3-PIN 90° PLUG-IN PIGTAIL FOR FEMALE-PIN LAMPS
• 10.5" Long, Chassis Ground, Blunt Cut Wires
• Dual function for S / T / T lamps -
PETERSON 3-WIRE HARD SHELL LED PLUG
• Weatherproof AMP To PL-3 Female -
TRUCK-LITE RIGHT ANGLE STOP/TAIL/TURN PLUG
• 16GA GPT Wire, Female Straight PL-3, Right Angle PL-3/Right Angle PL-3, 10" -
PICO HEADLIGHT CONNECTOR-FORD
• Weather-Pack Seal Connector
• 2-Wire 16ga, For Use With 9008/H13 Pigtail -
PICO SOCKET BASE LAMP-FORD
• 90° Bulb Socket, 3-Wire 18ga Leads
• Use With Part 5486PT -
PICO TAILLIGHT SOCKET-FORD
• 3-Wire Stop/Tail/Turn
• For Use With Bulb 3157, Part 5484PT -
GROTE HEADLIGHT CONNECTOR HARNESS
• 2 Wire 18 Gauge 12" Long
• For use with 9004 & 9007 bulbs -
Stop / Tail / Turn Three-Wire Plug-In Pigtails for Female Pin Lamps
• 11 1/2" Long, Chassis Ground, Blunt Cut Wires
• Dual function for S / T / T lamps
• Factory-moldedOut of stock -
6" Packard Connector Pigtail
• Sealed plug-in style pigtail -
Hard-Shell Connector Pigtail 10"
• Standard 4-Pin Hard Shell connector for the 4-in-1 Stop Tail Turn Light with integrated back-up
• Male Pin connection to vehicle -
WELDON 3 WIRE PLUG ASSEMBLY -
GROTE TAIL LIGHT CONNECTOR SOCKET
• 3 Wire 18 Gauge 12" Long
• For use with 3057 & 3157 bulbs -
PETERSON 10" EXTENSION HARNESS
• AMP Type Conector for S/T/T -
MAXXIMA HEADLIGHT LOAD EQUALIZER MODULE - BLACK
• 12.8 Max. Voltage, 36" Lead For 7", 5x7
• 3-Pin H4 Connector -
TRUCK-LITE SIGNAL-STAT MARKER/CLEARANCE/TURN SIGNAL HARNESS
• 20" Single Plug, 18 Gauge, Blunt Cut
• Packard Metri-Pack Connector, For 5800 Series -
TRUCK-LITE LED PL3 STOP/TURN PLUG
• 16GA GPT Wire, Fit 'n Forget S.S.
• Stripped End/Ring Terminal, 8" -
MAXXIMA 3-PIN 90° PLUG-IN PIGTAIL FOR FEMALE-PIN LAMPS
• 12" Long, Chassis Ground, Blunt Cut Wires
• Dual function for S / T / T lamps -
TRUX TRIPLE FEMALE BULLET PLUG WIRE HARNESS
• 16 Gauge Wire 6" Spacing Between Plugs -
MAXXIMA 3-PIN MALE TO MALE
• Grote Adapter Harness -
GROTE TAIL LIGHT CONNECTOR SOCKET
• 3 wire 18 Gauge 12" Long
• For use with 3057 & 3157 Bulbs -
GROTE HARD-SHELL WEATHERPACK CONNECTOR PLUG
• 11" Long, Chassis Ground, Blunt Cut Wires