Clearance & Marker Lamps

2 1/2" Surface-Mount Single-Bulb Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• 12,000+ hour bulb
• Snap-on lens for easy bulb replacement
• Heavy-duty 2

Two-Bulb Square-Corner Clearance / Marker Lamp
• Amber, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at a

Sentry Sealed Marker/Side Turn Lamp
• Amber, Black Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded dock applications
• Sentry lamp

Sealed Turtleback II Clearance / Marker Lamp - ABS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®

Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when

Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene

Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene

School Bus Rectangular Marker Light-AMBER
• Fits most school bus applications
• OEM-style w/Included mounting pad

Flush-Mount Cab Marker Light-AMBER
• Polycarbonate Hermetic lens to housing seal

Die-Cast, Aluminum Clearance / Marker Lamp
• Red Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy retrofits
• Lens replaces comparable

Beehive Clearance Marker-RED
• Wide light diffusion optic design
• Bracket is permanently attached
• Fade-resistant, snap-on acrylic lens
• Meets PC function when mounted at a 45° angle
•

Clearance Marker with Built-In Reflector-AMBER
• Corrosion-resistant body
• Flange mounting & built-in reflector
• Boat, snowmobile, trailer, and RV

Die-Cast, Aluminum Clearance / Marker Lamp
• Amber Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy

Sealed Turtleback® II Clearance / Marker Lamp / REFLEX LENS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail

Amber, Clearance/Marker Replacement Lens
Fits Light Assy G4602, G4603
• Length: 4" (101.6mm)
• Width: 2" (50.88mm)
• Thickness: 0.76" (19.30mm)

Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when

Chrome-Armored Clearance Marker Light
• Flat back; no bulb socket hole required
• Direct interchange for competitive models
• Meets PC function when mounted at a 45° angle
• Material:

Wrap-Around 5 Function Rear Light LH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• Right Hand use 52372

Clearance / Marker Lamp - Red
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulb

Clearance / Marker Lamp-AMBER
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulb

Sealed Clearance / Marker Lamp
• Red, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate

Sealed Clearance / Marker Lamp
• Amber, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate

Cab Marker Lamp
• Amber, Polypropylene / Acrylic
• Fits flat or slight contour surfaces
• Replaces original equipment on Ford trucks
• Meets sidemarker and front clearance requirements simultaneously

Sealed Turtleback® II Clearance / Marker Lamp / Refle
• Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback® lens

Clearance Marker Light Bar-RED
• Sealed flow-through harness
• Three replaceable snap-on lamps
• Rugged reinforced polycarbonate bar

Sealed, OEM Style Side Turn Marker Lamp
• Amber,Polycarbonate
• Surface-mount lamp
• Combination turn signal and side marker

Beehive Clearance Marker-AMBER
• Wide light diffusion optic design
• Bracket is permanently attached
• Fade-resistant, snap-on acrylic lens
• Meets PC function when mounted at a 45° angle
•

Clearance Marker Replacement Lens
• Economy Cab Lens, AMBER
• Length: 5.19" (131.78mm)
• Width: 1.96" (49.86mm)
• Thickness: 1.41" (35.96mm)

Aerodynamic Cab Marker Light-AMBER
• Easy snap-on lens
• Optics illuminate full lens
• Meets side marker and front clearance requirements simultaneously
• Voltage Amp: 12V / .35A
• Material: