Clearance & Marker Lamps
-
2 1/2" Surface-Mount Single-Bulb Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• 12,000+ hour bulb
• Snap-on lens for easy bulb replacement
• Heavy-duty 2 -
Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene -
Cab Marker With Shield 2 Bulb 1 Wire-Red
• 5.25" x 4.68" Chrome Plated Shield -
5180 Series Incandescent Marker-RED
• 3.5" x 1.5" Acrylic Lens
• Built in shield with plugOut of stock -
Die-Cast, Aluminum Clearance / Marker Lamp
• Red Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy retrofits
• Lens replaces comparable -
TRUCK-LITE SIGNAL STAT MARKER/CLEARANCE LIGHT - RED
• P2, 2 Screw, Hard-Wired, Stripped End, 12V
• Black Rubber Housing, Aluminum Base -
Beehive Clearance Marker-RED
• Wide light diffusion optic design
• Bracket is permanently attached
• Fade-resistant, snap-on acrylic lens
• Meets PC function when mounted at a 45° angle
• -
ARROW SAFETY 5" THINLINE INCADESENT MARKER-RED
• 12V, 168 bulb, 3 Candela, .35amp, Single Wire-Hot
• ABS plastic base, acrylic lens, zinc plated bronze contacts -
4" Cab Marker 2 Wire-Red
• With Shield Use 5120-1300-10Out of stock -
TRUCK-LITE SUPER 21 INCADESCENT REFLECTORIZED MARKER/CLEARANCE LIGHT - RED
• Single Bulb, P2, 2 Screw, Super 21 Plug, 12v
• 12V Designed At 14V, .33 Amp, 2 Cp -
TRUCK-LITE 26 SERIES INCANDESCENT OVAL MARKER/CLEARANCE LAMP - RED
• 12V 2 Bulb, P2, 2-Screw, Hard Wired, Stripped End
• Snap-In Acrylic Lens, Two #194 Wedge Base Bulbs -
Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when -
Powder Coat Black Shield-GREY
• Fits 5150/5170/5180 series markers
• Marker Lamp not included -
Chrome-Armored Clearance Marker Light
• Flat back; no bulb socket hole required
• Direct interchange for competitive models
• Meets PC function when mounted at a 45° angle
• Material: -
PETERSON 14" SUBMERSIBLE INCANDESCENT LIGHT BAR-RED
• Stainless steel bar is corrosion-resistant with three sealed lights
• Long-Life bulbs, Pre-wired with 60” lead wire -
5150 Series Incandescent Marker-RED
• 3.5" x 1.5" acrylic lens
• Armored metal shield sold separately
Black Shield# 0J10-2161-BK
Grey Shield# 0J10-2161-GYOut of stock -
Wrap-Around 5 Function Rear Light LH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• Right Hand use 52372
Trailer, RV, Marine & Utility -
TRUCK-LITE SUPER 21 INCANDESCENT MARKER/CLEARANCE LIGHT - RED
• 12V Single Bulb, PC, 2 Screw -
Clearance / Marker Lamp - Red
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulb -
Sealed Clearance / Marker Lamp
• Red, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate -
Sealed Turtleback® II Clearance / Marker Lamp / Refle
• Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback® lens -
Clearance Marker Light Bar-RED
• Sealed flow-through harness
• Three replaceable snap-on lamps
• Rugged reinforced polycarbonate bar -
Wrap-Around 5 Function Rear Light RH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• LH Hand use 52362
Trailer, RV, Marine & Utility -
School Bus Wedge Marker Light-RED
• Adaptable front/side/rear mount
• Galvanized Steel/Acrylic
• Fits most school bus applications -
School Bus Rectangular Marker Light-RED
• Fits most school bus applications
• OEM-style w/ Included mounting pad -
Two-Bulb Square-Corner Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at -
Sealed Turtleback® II Clearance / Marker Lamp / Optic Lens
• Red, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
Red Clearance/Marker Replacement Lens
Fits Light Assy 45262
• Length: 3.99" (101.34mm)
• Width: 2" (50.88mm)
• Thickness: 0.75" (19.05mm)
Red Clearance/Marker Replacement Lens
Fits Light Assy G4602, G4603
• Length: 4" (101.6mm)
• Width: 2" (50.88mm)
• Thickness: 0.76" (19.30mm)
TRUCK-LITE 22 SERIES DUAL-CONTACT MARKER/CLEARANCE LIGHT - RED
• Single Bulb, Side/Turn Signal 2 Screw, 12V, PL-3, P2
• Rectangular Sealed Polycarbonate Lens & Housing