Clearance & Marker Lamps

Clearance / Marker Lamp
• Red, Polycarbonate
• Hermetic lens to housing seal
• 12-volt version features a 12,000+ hour bulb
• Uses double-seal UBS pigtail
• Rectangular shape fits narrow applications
• Meets PC

SuperNova® LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit board protection
• Hermetic lens to housing seal
• Advanced pin connection system
• Uses same UBS pigtail as incandescent

Hi Count Turtleback II LED Lamp-Red
• Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Molded bullet with chassis ground-ring terminal connection
• Shock absorbing, heat-resistant lens and

Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene

Rectangular Clearance Marker Light-Red
• Sealed lamp design
• 3-diode LED pattern
• Fits all popular mounting accessories
• Standard female pin connector

Rectangular Clearance Marker-Red
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

Rectangular Clearance Marker-Red
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

SuperNova Sealed Turtleback® II LED Clearance / Marker Lamp / PC RATED
• Red, Polycarbonate (Optic) / Acrylic (Reflex)
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid-brass terminals

Die-Cast, Aluminum Clearance / Marker Lamp
• Red Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy retrofits
• Lens replaces comparable

SuperNova 3" Thin-Line LED Clearance / Marker Lamp
• Red, Polycarbonate
• 3" mounting center
• Field-replaceable lens
• Encapsulant potting for total circuit-board protection
• Anti-torque design protects against over-tightening and lens cracking
• Wire

SuperNova® Sealed Turtleback® II LED Clearance / Marker Lamp / BUILT-IN REFLECTOR
• Red, Polycarbonate (Optic) / Acrylic (Reflex)
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid-brass terminals

MicroNova Dot LED Clearance Marker Light-RED
• No fasteners required
• Sleek aerodynamic styling extends less than 3/8" from mounted surface

Clearance / Marker Lamp
• Red,Polycarbonate
• Rectangular, double bulb lamp
• 12-volt version features a 12,000+ hour bulb
• Narrow mounting applications
• Hermetic lens-to-housing seal
• Meets PC function only when mounted at a

Red, Hi Count® 3-Diode LED Clearance / Marker Lamp
• Polycarbonate
• Hermetic lens-to-housing seal
• Uses the same UBS double-seal pigtail as the incandescent version for a quick Plug-and-Go

SuperNova® Low-Profile LED Clearance / Marker Lamp
• Red, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lens

Chrome-Armored Clearance Marker Light
• Flat back; no bulb socket hole required
• Direct interchange for competitive models
• Meets PC function when mounted at a 45° angle
• Material:

Wrap-Around 5 Function Rear Light LH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• Right Hand use 52372

Clearance / Marker Lamp - Red
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulb

Sealed Clearance / Marker Lamp
• Red, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate

Sealed Turtleback® II Clearance / Marker Lamp / Refle
• Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback® lens

SuperNova LED Clearance / Marker Lamp
• Red Lens, Red Body, Polycarbonate
• Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal

SuperNova 3" Center Thin-Line Dual-Intensity LED Clearance / Marker Lamp
• Red, Polycarbonate
• Multi-function lamp enhances signaling visibility and safety
• Compact size for narrow mounting locations
• Lamp functions as a marker,

Wrap-Around 5 Function Rear Light RH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• LH Hand use 52362

SuperNova Thin-Line LED Clearance Marker Light
• RED-Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal pigtail

SuperNova 3" Thin-Line LED Clearance Marker Light
• Field-replaceable lens, 3" mounting center
• Meets PC function when mounted at a 45° angle
• Encapsulant potting for total circuit-board protection

Sealed Turtleback® II Clearance / Marker Lamp / Optic Lens
• Red, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail

SuperNova® LED Clearance / Marker Lamp With Built-In Reflector
• Red, Polycarbonate / Acrylic
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid brass terminals are sealed to

Sealed Rectangular LED Clearance / Marker Lamp
• Red, Acrylic
• Dual Voltage 12V and 24V
• Encapsulant potting for total circuit-board protection against vibration and corrosion
• Hermetic lens to housing seal

Square PC-Rated Clearance Marker Light
• Standard lamps on UPS
• Service life rated at 15,000 hours
• Comes w/ gasket and Sonic sealed lens
• Direct replacement for Truck-Lite®

Rectangular Clearance Marker Light-Red
• Sealed lamp design
• 3-diode LED pattern
• Fits all popular mounting accessories
• Standard female pin connector