Clearance & Marker Lamps
- 2 1/2" Surface-Mount Single-Bulb Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• 12,000+ hour bulb
• Snap-on lens for easy bulb replacement
• Heavy-duty 2 - Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene - Die-Cast, Aluminum Clearance / Marker Lamp
• Red Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy retrofits
• Lens replaces comparable - Beehive Clearance Marker-RED
• Wide light diffusion optic design
• Bracket is permanently attached
• Fade-resistant, snap-on acrylic lens
• Meets PC function when mounted at a 45° angle
• - Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when - Chrome-Armored Clearance Marker Light
• Flat back; no bulb socket hole required
• Direct interchange for competitive models
• Meets PC function when mounted at a 45° angle
• Material: - Wrap-Around 5 Function Rear Light LH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• Right Hand use 52372
Trailer, RV, Marine & Utility - Clearance / Marker Lamp - Red
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulb - Sealed Clearance / Marker Lamp
• Red, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate - Sealed Turtleback® II Clearance / Marker Lamp / Refle
• Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback® lens - Clearance Marker Light Bar-RED
• Sealed flow-through harness
• Three replaceable snap-on lamps
• Rugged reinforced polycarbonate bar - Wrap-Around 5 Function Rear Light RH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• LH Hand use 52362
Trailer, RV, Marine & Utility - Two-Bulb Square-Corner Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at - Sealed Turtleback® II Clearance / Marker Lamp / Optic Lens
• Red, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtailOut of stockRed Clearance/Marker Replacement Lens
Fits Light Assy 45262
• Length: 3.99" (101.34mm)
• Width: 2" (50.88mm)
• Thickness: 0.75" (19.05mm)
Red Clearance/Marker Replacement Lens
Fits Light Assy G4602, G4603
• Length: 4" (101.6mm)
• Width: 2" (50.88mm)
• Thickness: 0.76" (19.30mm)School Bus Wedge Marker Light-RED
• Adaptable front/side/rear mount
• Galvanized Steel/Acrylic
• Fits most school bus applicationsSchool Bus Rectangular Marker Light-RED
• Fits most school bus applications
• OEM-style w/ Included mounting padTwo-Bulb Oval Pigtail-Type Clearance / Marker Lamp/ OPTIC LENS
• Red, Polpropylene / Acrylic
• Standard snap-on lens for easy bulb replacement
• Two stainless-steel groundsSquare PC-Rated Clearance Marker Light
• Standard lamps on UPS
• Service life rated at 15,000 hours
• Comes w/ gasket and Sonic sealed lens
• Direct replacement for Truck-Lite®UPS PACKAGE VEHICLESThin-Line Single-Bulb Clearance / Marker Lamp
• Red,Polycarbonate / Acrylic
• Narrow rail and channel-mounting
• Snap-on lens for easy bulb replacement
• Attached pigtailField Resealable Lens Turtleback II Clearance / Marker Lamp
• Red, Polycarbonate / Acrylic