Clearance & Marker Lamps
-
TRUCK-LITE INCANDESCENT SIDE MOUNT TURN SIGNAL KIT - AMBER
• 12V Single Bulb, Hardwired, Stripped End
• Bracket Mount, Snap-In Lens With 90 Degree Max Edge Visibility - Two-Bulb Square-Corner Clearance / Marker Lamp
• Amber, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at aOut of stock - Sentry Sealed Marker/Side Turn Lamp
• Amber, Black Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded dock applications
• Sentry lamp - Sealed Turtleback II Clearance / Marker Lamp - ABS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®Out of stock -
TRUCK-LITE 22 SERIES DUAL-CONTACT MARKER/CLEARANCE LIGHT - AMBER
• Single Bulb, Side/Turn Signal 2 Screw, 12V, PL-3, P2
• Rectangular Sealed Polycarbonate Lens & Housing -
TRUCK-LITE 26 SERIES INCANDESCENT OVAL MARKER/CLEARANCE LAMP - AMBER
• 12V 2 Bulb, P2, 2-Screw, Hard Wired, Stripped End
• Snap-In Acrylic Lens, Two #194 Wedge Base Bulbs -
TRUCK-LITE 26 SERIES INCANDESCENT MARKER/SIGNAL LIGHT - AMBER
• 12V Round Single Bulb, Stainless Steel Housing, Acrylic Lens
• P2, 2 Screw Mount, Hard Wired, Stripped End - Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when - Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene - School Bus Rectangular Marker Light-AMBER
• Fits most school bus applications
• OEM-style w/Included mounting padOut of stock - Flush-Mount Cab Marker Light-AMBER
• Polycarbonate Hermetic lens to housing sealFreigthliner Trucks -
ARROW 4" THINLINE INCADESENT MARKER-AMBER
• 12V, 193 bulb, 2 Amp, .33 Wiring, Single Wire-Hot
• Polycarbonate base, polycarbonate lens, brass contacts - Clearance Marker with Built-In Reflector-AMBER
• Corrosion-resistant body
• Flange mounting & built-in reflector
• Boat, snowmobile, trailer, and RV - Cab Marker W/Shield 2 Bulb/2 Wire-Amber
• 5.25" x 4.68" Chrome Plated Shield -
TRUCK-LITE SIGNAL-STAT INCANDESCENT MARKER/CLEARANCE LIGHT - AMBER
• 12V Hardwired, Stripped End, High-Impact Polycarbonate, Chrome Housing
• Snap-On Lens Permits Easy Bulb And Lens Replacement -
TRUCK-LITE SUPER 21 RECTANGULAR MARKER/CLEARANCE LIGHT - AMBER
• 12V Single Bulb Designed At 14V, .33 Amp, 2 Cp
• P2, 2 Screw, Super 21 Plug, Stripped End - Die-Cast, Aluminum Clearance / Marker Lamp
• Amber Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy - Sealed Turtleback® II Clearance / Marker Lamp / REFLEX LENS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtailOut of stockAmber, Clearance/Marker Replacement Lens
Fits Light Assy G4602, G4603
• Length: 4" (101.6mm)
• Width: 2" (50.88mm)
• Thickness: 0.76" (19.30mm)Powder Coat Black Shield-BLACK
• Fits 5150/5170/5180 series markers
• Marker Lamp not included5150 Series Incandescent Marker-Amber
• 3.5" X 1.5" acrylic lens
• Armored metal shield sold separately
Black Shield# 0J10-2161-BK
Grey Shield# 0J10-2161-GYTRUCK-LITE SUPER 21 INCANDESCENT MARKER/CLEARANCE LIGHT - AMBER
• Single Bulb, PC, 2 Screw, Super 21 Plug, 12V
• 12V Designed At 14V, .33 Amp, 2 CpCab Marker With Shield 2 Bulb 1 Wire-AMBER
• 5.25" x 4.68" Chrome Plated ShieldTRUCK-LITE 20 SERIES INCANDESCENT BEEHIVE SIDE/TURN LIGHT - AMBER
• 12V Single Bulb, Gray Bracket Mount, Hardwired, Stripped End
• Features Snap-In Lens With A 90 Maximum Edge VisibilityClearance / Marker Lamp-AMBER
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulbSealed Clearance / Marker Lamp
• Amber, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plateCab Marker Lamp
• Amber, Polypropylene / Acrylic
• Fits flat or slight contour surfaces
• Replaces original equipment on Ford trucks
• Meets sidemarker and front clearance requirements simultaneously
Sealed, OEM Style Side Turn Marker Lamp
• Amber,Polycarbonate
• Surface-mount lamp
• Combination turn signal and side markerOut of stockTRUCK-LITE SIGNAL STAT MARKER/CLEARANCE LIGHT - AMBER
• P2, 2 Screw, Hard-Wired, Stripped End, 12V
• Black Rubber Housing, Aluminum BaseTRUCK-LITE SUPER 21 INCADESCENT REFLECTORIZED MARKER/CLEARANCE LIGHT - AMBER
• Single Bulb, P2, 2 Screw, Super 21 Plug
• 12v Designed At 14v, .33 Amp, 2 Cp