Clearance & Marker Lamps
-
Two-Bulb Square-Corner Clearance / Marker Lamp
• Amber, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at aOut of stock -
Sentry Sealed Marker/Side Turn Lamp
• Amber, Black Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded dock applications
• Sentry lamp -
Sealed Turtleback II Clearance / Marker Lamp - ABS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®Out of stock -
Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when -
Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene -
School Bus Rectangular Marker Light-AMBER
• Fits most school bus applications
• OEM-style w/Included mounting padOut of stock -
Flush-Mount Cab Marker Light-AMBER
• Polycarbonate Hermetic lens to housing sealFreigthliner Trucks -
Clearance Marker with Built-In Reflector-AMBER
• Corrosion-resistant body
• Flange mounting & built-in reflector
• Boat, snowmobile, trailer, and RV -
Die-Cast, Aluminum Clearance / Marker Lamp
• Amber Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy -
Sealed Turtleback® II Clearance / Marker Lamp / REFLEX LENS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtailOut of stock
Amber, Clearance/Marker Replacement Lens
Fits Light Assy G4602, G4603
• Length: 4" (101.6mm)
• Width: 2" (50.88mm)
• Thickness: 0.76" (19.30mm)
Clearance / Marker Lamp-AMBER
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulb
Sealed Clearance / Marker Lamp
• Amber, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate
Cab Marker Lamp
• Amber, Polypropylene / Acrylic
• Fits flat or slight contour surfaces
• Replaces original equipment on Ford trucks
• Meets sidemarker and front clearance requirements simultaneously
Sealed, OEM Style Side Turn Marker Lamp
• Amber,Polycarbonate
• Surface-mount lamp
• Combination turn signal and side markerOut of stock
Beehive Clearance Marker-AMBER
• Wide light diffusion optic design
• Bracket is permanently attached
• Fade-resistant, snap-on acrylic lens
• Meets PC function when mounted at a 45° angle
•
Clearance Marker Replacement Lens
• Economy Cab Lens, AMBER
• Length: 5.19" (131.78mm)
• Width: 1.96" (49.86mm)
• Thickness: 1.41" (35.96mm)
GROTE CLEARANCE MARKER REPLACEMENT LENS
• Small Aerodynamic Cab Lens, Amber
• Length: 7.5" (190.5mm)
• Width: 2.59" (65.78mm)
• Thickness: 1.87" (47.49mm)
Aerodynamic Cab Marker Light-AMBER
• Easy snap-on lens
• Optics illuminate full lens
• Meets side marker and front clearance requirements simultaneously
• Voltage Amp: 12V / .35A
• Material:Mack/Navistar/Freightliner
Ford/Peterbilt
Ford Low-Profile Aerodynamic Cab Marker
• Aerodynamic design w/field replaceable lens
• Cab marker replacement for heavy-duty Ford trucks
• Mounting screws included
Thin-Line Single-Bulb Clearance / Marker Lamp
• Amber, Polycarbonate / Acrylic
• Narrow rail and channel-mounting
• Snap-on lens for easy bulb replacement
• Attached pigtail
Two-Bulb Oval Pigtail-Type Clearance / Marker Lamp / Optic Lens
• Amber, Polpropylene / Acrylic
• Standard snap-on lens for easy bulb replacement
• Two stainless-steel
2 1/2" Surface-Mount Single-Bulb Clearance / Marker Lamp
Amber, Polypropylene / Acrylic
• 12,000+ hour bulb
• Snap-on lens for easy bulb replacement
• Heavy-duty 2 CP wedge-base bulb
• OE replacement on
Two-Bulb Turtleback Clearance / Marker Lamp / Optic Lense
• Amber, Polypropylene / Polycarbonate / Acrylic
• Turtleback lens design for maximum durability
• Two stainless steel grounds
Sealed Clearance / Marker Lamp
• Amber, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate
Sealed Turtleback® II Clearance / Marker Lamp/ OPTIC LENS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®
Sealed, OEM Style Side Turn Marker Lamp
• Amber, Polycarbonate
• Surface-mount lamp
• Combination turn signal and side markerOut of stock
Ford Light Duty Cab Marker Light-AMBER
• Replaceable bulb design
• Hermetic lens-to-housing seal
• Mounting pad and screws included
Clearance Marker Light with Peak Lens-AMBER
• Shock-resistant bulb mount
• Snap-on lens for easy bulb replacement
• Meets PC function when mounted at a 45° angle
Sentry Sealed Marker/Side Turn Lamp
• Amber, White Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded