Clearance & Marker Lamps

School Bus Wedge Marker Light-AMBER
• Adaptable front/side/rear mount
• Galvanized Steel/Acrylic
• Fits most school bus applications

SuperNova Thin-Line LED Clearance Marker Light
• AMBER-Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal pigtail

SuperNova 2 1/2" LED Clearance Marker Lights
• AMBER-Hermetic lens-to-housing seal
• Encapsulant potting for total circuit-board protection
• Uses the same UBS double-seal pigtail as the incandescent version for

MicroNova Dot LED Clearance Marker Light-AMBER
• No fasteners required
• Sleek aerodynamic styling extends less than 3/8" from mounted surface

Torsion Mount III Oval Turn Marker Light-AMBER
• Contains reflex reflector
• Fits standard oval lamp grommets and brackets
• Extended dome for added visibility from front and rear
•

SuperNova Oval LED Side/Turn/Marker Light
• Male pin and hard shell connection options
• Flashing turn signal is visible to driver during operation
• Single circuit board and single reflector

Clearance Marker Replacement Lens
• Beehive Lens, Amber
• Fits Marker# 45023

2" 9-Diode Beehive LED Clearance Marker Light
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• Same UBS double-seal pigtail as the incandescent version for

2 1/2" Oval LED Clearance / Marker Lamp
Amber LED, Clear Lens
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp

Thin-Line Single-Bulb Clearance / Marker Lamp
• Red,Polycarbonate / Acrylic
• Narrow rail and channel-mounting
• Snap-on lens for easy bulb replacement
• Attached pigtail

Low-Profile Clearance Marker Light-RED
• Built-in Reflector, w/Bezel
• Field-replaceable lens
• Requires 1 1/4" socket hole for mounting
• Twist-in bulb socket for easy bulb replacement
• Polypropylene/Stainless-Steel/Acrylic

Low-Profile Clearance Marker Light-AMBER
• Built-in Reflector, w/Bezel
• Field-replaceable lens
• Requires 1 1/4" socket hole for mounting
• Twist-in bulb socket for easy bulb replacement
• Polypropylene/Stainless-Steel/Acrylic

SuperNova® 2 1/2" PC-Rated Clearance / Marker LED Lamp
• Red, Polycarbonate
• Hermetic lens-to-housing seal
• Encapsulant potting protects the circuit board from vibration and corrosive particles providing longer life
• Uses same

SuperNova® 2 1/2" PC-Rated Clearance / Marker LED Lamp
• Amber, Polycarbonate
• Hermetic lens-to-housing seal
• Encapsulant potting protects the circuit board from vibration and corrosive particles providing longer life
• Uses same

SuperNova 2" LED Clearance / Marker Lamp
• Amber, Polycarbonate
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Uses same UBS double-seal pigtail as incandescent for quick Plug-and-Go®

SuperNova 2 1/2" LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Uses same UBS double-seal pigtail as incandescent version for a quick

SuperNova 2 1/2" Beehive LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit-board protection
• Tin-plated, solid brass terminals are sealed to housing, to resist corrosion and eliminate

SuperNova® 3" Thin-Line LED Clearance / Marker Lamp **24 Volt**
• Red, Polycarbonate
• 3" mounting center
• Field-replaceable lens
• Encapsulant potting for total circuit-board protection
• Anti-torque design protects against over-tightening and lens

SuperNova® LED Clearance / Marker Lamp With Built-In Reflector
• Red, Polycarbonate / Acrylic
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid brass terminals are sealed to

MicroNova LED Clearance / Marker Lamp
• Red w/Grommet, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant potting

MicroNova LED Clearance / Marker Lamp
• Amber w/Grommet, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant potting

Sentry Sealed Marker/Side Turn Lamp
• Amber, White Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded

SuperNova Oval LED Side Turn/Marker, Male-Pin Termination
• Amber, Polycarbonate
• Flashing turn signal is visible to driver during operation
•

SuperNova Oval LED Side Turn/Marker, Male-Pin Termination, w/ Gray Theft-Resistant Flange
• Amber, Polycarbonate
• Flashing turn signal is visible to driver

Amber Clearance/Marker Replacement Lens
Fits Light Assy 45262
• Length: 3.99" (101.34mm)
• Width: 2" (50.88mm)
• Thickness: 0.75" (19.05mm)

Clear, Hi Count® 2 1/2”³ LED Clearance / Marker
• Polycarbonate
• Hermetic lens-to-housing seal
• Uses the same UBS double-seal pigtail as the incandescent version for a quick Plug-and-Go

Two-Bulb Oval Pigtail-Type Clearance / Marker Lamp/ OPTIC LENS
• Red, Polpropylene / Acrylic
• Standard snap-on lens for easy bulb replacement
• Two stainless-steel grounds

SuperNova Sealed Turtleback® II LED Clearance / Marker Lamp / PC RATED
• Amber, Polycarbonate (Optic) / Acrylic (Reflex)
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid-brass terminals

Oval Side Turn/Marker Lamp
• Amber, Polycarbonate
• Hermetic lens-to-housing seal
• Vibration resistant bulb mounting system
• Standard female pin connection