Clearance & Marker Lamps

MicroNova LED Clearance / Marker Lamp
• Amber w/Chrome Bezel, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant

Sealed, OEM Style Side Turn Marker Lamp
• Amber, Polycarbonate
• Surface-mount lamp
• Combination turn signal and side marker

Red Clearance/Marker Replacement Lens
Fits Light Assy 45262
• Length: 3.99" (101.34mm)
• Width: 2" (50.88mm)
• Thickness: 0.75" (19.05mm)

Red Clearance/Marker Replacement Lens
Fits Light Assy G4602, G4603
• Length: 4" (101.6mm)
• Width: 2" (50.88mm)
• Thickness: 0.76" (19.30mm)

Red Hi Count® 2 1/2”³ 13-Diode Beehive LED Clearance / Marker Lamp
• Polycarbonate
• Hermetic lens-to-housing seal
• Uses the same UBS double-seal pigtail as the incandescent version for

Amber Hi Count® 2 1/2”³ 13-Diode Beehive LED Clearance / Marker Lamp
• Polycarbonate
• Hermetic lens-to-housing seal
• Uses the same UBS double-seal pigtail as the incandescent version for

Red, Hi Count® Square-Corner 13-Diode LED Clearance/Marker
• Polycarbonate / Acrylic
• Molded snap-ring
• Encapsulent potting for total circuit

Two-Bulb Oval Pigtail-Type Clearance / Marker Lamp/ OPTIC LENS
• Red, Polpropylene / Acrylic
• Standard snap-on lens for easy bulb replacement
• Two stainless-steel grounds

SuperNova Sealed Turtleback® II LED Clearance / Marker Lamp / PC RATED
• Amber, Polycarbonate (Optic) / Acrylic (Reflex)
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid-brass terminals

Ford Light Duty Cab Marker Light-AMBER
• Replaceable bulb design
• Hermetic lens-to-housing seal
• Mounting pad and screws included

Clearance Marker Light with Peak Lens-AMBER
• Shock-resistant bulb mount
• Snap-on lens for easy bulb replacement
• Meets PC function when mounted at a 45° angle

SuperNova Oval LED Side Turn Marker
• Flashing turn signal is visible to driver during operation
• Single circuit board and single reflector component design

Square PC-Rated Clearance Marker Light
• Standard lamps on UPS
• Service life rated at 15,000 hours
• Comes w/ gasket and Sonic sealed lens
• Direct replacement for Truck-Lite®

SuperNova Oval LED Side Turn Marker Light
• Flashing turn signal is visible to driver during operation
• 50 state legal, meets SAE J914 E/E2 and California title 13
•

2 1/2" Oval LED Clearance / Marker Lamp
Amber LED, Clear Lens
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp

Thin-Line Single-Bulb Clearance / Marker Lamp
• Red,Polycarbonate / Acrylic
• Narrow rail and channel-mounting
• Snap-on lens for easy bulb replacement
• Attached pigtail

Low-Profile Clearance Marker Light-RED
• Built-in Reflector, w/Bezel
• Field-replaceable lens
• Requires 1 1/4" socket hole for mounting
• Twist-in bulb socket for easy bulb replacement
• Polypropylene/Stainless-Steel/Acrylic

Low-Profile Clearance Marker Light-AMBER
• Built-in Reflector, w/Bezel
• Field-replaceable lens
• Requires 1 1/4" socket hole for mounting
• Twist-in bulb socket for easy bulb replacement
• Polypropylene/Stainless-Steel/Acrylic

SuperNova® 3" Thin-Line LED Clearance / Marker Lamp **24 Volt**
• Red, Polycarbonate
• 3" mounting center
• Field-replaceable lens
• Encapsulant potting for total circuit-board protection
• Anti-torque design protects against over-tightening and lens

SuperNova® LED Clearance / Marker Lamp With Built-In Reflector
• Red, Polycarbonate / Acrylic
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid brass terminals are sealed to

Sentry Sealed Marker/Side Turn Lamp
• Amber, White Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded

Amber Clearance/Marker Replacement Lens
Fits Light Assy 45262
• Length: 3.99" (101.34mm)
• Width: 2" (50.88mm)
• Thickness: 0.75" (19.05mm)

M1 Series LED Clearance Marker Light-AMBER
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Molded bullet kits come with two replacement mating connectors
• Potted

School Bus Wedge Marker Light-AMBER
• Adaptable front/side/rear mount
• Galvanized Steel/Acrylic
• Fits most school bus applications

SuperNova Thin-Line LED Clearance Marker Light
• AMBER-Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal pigtail

MicroNova Dot LED Clearance Marker Light-AMBER
• No fasteners required
• Sleek aerodynamic styling extends less than 3/8" from mounted surface