Clearance & Marker Lamps
- SuperNova LED Clearance / Marker Lamp
• Red Lens, Red Body, Polycarbonate
• Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal - Clearance Marker Light Bar-RED
• Sealed flow-through harness
• Three replaceable snap-on lamps
• Rugged reinforced polycarbonate bar - SuperNova 3" Center Thin-Line Dual-Intensity LED Clearance / Marker Lamp
• Red, Polycarbonate
• Multi-function lamp enhances signaling visibility and safety
• Compact size for narrow mounting locations
• Lamp functions as a marker, - SuperNova 3" Center Thin-Line Dual-Intensity LED Clearance / Marker Lamp
• Amber, Polycarbonate
• Multi-function lamp enhances signaling visibility and safety
• Compact size for narrow mounting locations
• Lamp functions as a - MicroNova Dot LED Clearance / Marker Lamp
• Amber PC w/Gromment, Acrylic
• Sleek aerodynamic styling extends less than 3/8" from mounted surface
• No fasteners required - Sealed, OEM Style Side Turn Marker Lamp
• Amber,Polycarbonate
• Surface-mount lamp
• Combination turn signal and side markerOut of stockHi Count® Square-Corner 13-Diode LED Clearance/Marker
• Polycarbonate / Acrylic
• Molded snap-ring
• Encapsulent potting for total circuit boardBeehive Clearance Marker-AMBER
• Wide light diffusion optic design
• Bracket is permanently attached
• Fade-resistant, snap-on acrylic lens
• Meets PC function when mounted at a 45° angle
•SuperNova 3" Thin-Line LED Clearance Marker Light
• Field-replaceable lens, 3" mounting center
• Meets PC function when mounted at a 45° angle
• Encapsulant potting for total circuit-board protectionOut of stockM5 Series LED Clearance Marker Light-AMBER
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Small size fits into narrow applications
• Corrosion-resistant chrome-plated bezels
• Kits contain two replacementClearance Marker Replacement Lens
• Economy Cab Lens, AMBER
• Length: 5.19" (131.78mm)
• Width: 1.96" (49.86mm)
• Thickness: 1.41" (35.96mm)GROTE CLEARANCE MARKER REPLACEMENT LENS
• Small Aerodynamic Cab Lens, Amber
• Length: 7.5" (190.5mm)
• Width: 2.59" (65.78mm)
• Thickness: 1.87" (47.49mm)2" 9-Diode Beehive LED Clearance Marker Light
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• Same UBS double-seal pigtail as the incandescent version forSuperNova Oval LED Side Turn Marker
• Male pin and hard shell connection options
• Flashing turn signal is visible to driver during operation
• Single circuit board and singleM3 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Potted for total circuit-board protection against vibration and corrosion
• KitsAerodynamic Cab Marker Light-AMBER
• Easy snap-on lens
• Optics illuminate full lens
• Meets side marker and front clearance requirements simultaneously
• Voltage Amp: 12V / .35A
• Material:Mack/Navistar/Freightliner
Ford/Peterbilt2" Round Clearance Marker Light-Red
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector2.5" Round Clearance Marker Light-Red
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector2" Round Clearance Marker Light-Amber
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connectorWrap-Around 5 Function Rear Light RH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• LH Hand use 52362
Trailer, RV, Marine & UtilityFord Low-Profile Aerodynamic Cab Marker
• Aerodynamic design w/field replaceable lens
• Cab marker replacement for heavy-duty Ford trucks
• Mounting screws includedSchool Bus Wedge Marker Light-RED
• Adaptable front/side/rear mount
• Galvanized Steel/Acrylic
• Fits most school bus applicationsSchool Bus Rectangular Marker Light-RED
• Fits most school bus applications
• OEM-style w/ Included mounting padSuperNova Thin-Line LED Clearance Marker Light
• RED-Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal pigtailOut of stockSuperNova 3" Thin-Line LED Clearance Marker Light
• Field-replaceable lens, 3" mounting center
• Meets PC function when mounted at a 45° angle
• Encapsulant potting for total circuit-board protectionM1 Series LED Clearance Marker Light-AMBER
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Molded bullet kits come with two replacement mating connectors
• PottedM5 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Small size fits into narrow applications
• Corrosion-resistant chrome-plated bezels
• Kits contain two replacement15" 3 LED Thin-Line Bar Light-AMBER
• Rated to 100,000 hours of service life
• Sealed marker lamps are shock- and vibration-resistant
• Impact-resistant housing is sealed for moisture protectionSuperNova Surface Mount LED Side Turn Marker
• Industry-standard 122.2-mm mounting for easy retrofits
• Lamp is visible from driver's rear view mirror while flashing
• Durable screw bosses withstandThin-Line Single-Bulb Clearance / Marker Lamp
• Amber, Polycarbonate / Acrylic
• Narrow rail and channel-mounting
• Snap-on lens for easy bulb replacement
• Attached pigtail