Clearance & Marker Lamps
-
TRUCK-LITE 33 SERIES LED ID LIGHT ASSEMBLY KIT- RED
• 12V, 3 Lights, Round Polycarbonate Lens And Housing, PVC Grommet
• Nylon Flange, Requires 3/4'' Mounting Hole -
MAXXIMA 1-1/4" 6 LED CLEARANCE/MARKER-RED
• 12.8 VDC, 80ma Max Amp Draw
• 2 Male 0.180 Bullet Connectors W/Grommet -
MAXXIMA 4" COMBINATION CLEARANCE MARKER LIGHT - RED
• 12.8 VDC, Amp Draw 110 Milliamps
• Polycarbonate, Bullet & Ring Connector -
2" 9-Diode Beehive LED Clearance Marker Light
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• Same UBS double-seal pigtail as the incandescent version for -
2 1/2" Oval LED Clearance / Marker Lamp
• Red, Polycarbonate
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached to -
SuperNova 2" LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Uses same UBS double-seal pigtail as incandescent for quick Plug-and-Go® -
SuperNova® Low-Profile LED Clearance / Marker Lamp
• Red, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lens
TRUCK-LITE 10 SERIES LED MARKER/CLEARANCE LAMP-RED
• Gray Polycarbonate Flange Mount, PL-10, 12V
• Polycarbonate Lens/Housing, Fit 'n Forget Or Standard
TRUCK-LITE LED 35 SERIES MARKER/CLEARANCE LIGHT KIT - RED
• Rectangular, P2, 2 Screw, Fit 'n Forget, Horizontal Mount
• 12V, .180 Bullet Terminal/Ring Terminal
Chrome-Armored Clearance Marker Light
• Flat back; no bulb socket hole required
• Direct interchange for competitive models
• Meets PC function when mounted at a 45° angle
• Material:
TRUCK-LITE SIGNAL-STAT LED MARKER/CLEARANCE LIGHT - RED
• Standard PL-10 Connection, P2 12V, Grommet Mount
• Unique 6 Diode Starburst Light Output
TRUCK-LITE SIGNAL-STAT MARKER/CLEARANCE LIGHT - RED
• 12V Bracket Mount, Hardwired, Stripped End, Two Bulb Design
• Optional Mounting Gasket Available
TRUCK-LITE SIGNAL-STAT LED MARKER/CLEARANCE LIGHT - RED
• 12V, P2, Standard PL-10 Connection
• Encapsulated Electronics Prevent Damage From Moisture/Corrosion
TRUCK-LITE SIGNAL STAT LED MARKER/CLEARANCE LIGHT - RED
• P2, 2 Screw, Reflectorized, Hard Wired, Stripped End, 12V
• Optional Mounting & Sealing Gaskets Available To Improve Seal Between Lamps
PETERSON 2" RED CLEARANCE/SIDE MARKER LIGHT
• Functions as side marker or clearance light
• Lens is welded to housing to form single unit
PETERSON 2" LED AUXILIARY TUNNEL LIGHT W/3D ILLUSION-RED
• Mirror look when off, 3D tunnel effect when on
• Compatible with 2" and 2.5" chrome bezels
PETERSON 14" SUBMERSIBLE INCANDESCENT LIGHT BAR-RED
• Stainless steel bar is corrosion-resistant with three sealed lights
• Long-Life bulbs, Pre-wired with 60” lead wire
PETERSON LED 3D AUXILIARY TUNNEL LIGHT-RED
• For off-road or accessory use only
• Mounts on 4" centers using #10 screws
• Hot wire can connect to either leadOut of stock
PETERSON 14" SUBMERSIBLE LED LIGHT BAR-RED
• Stainless steel bar is corrosion-resistant with three sealed lights
• Long-Life bulbs, pre-wired with 60” lead wire
MicroNova LED Clearance Marker Light-RED
• Integrated theft deterrent feature with C-clip makes it difficult to remove the clearance marker light once mounted
• Encapsulant potting for total circuit-board protection
M1 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Molded bullet kits come with two replacement mating connectors
• Potted
Clearance Marker SuperNova LED Light Bar-RED
• Snap-on replacement lamps
• Sealed flow-through UBS harness
• Rugged reinforced polycarbonate bar
• Voltage Amp: 12V / .18A
5150 Series Incandescent Marker-RED
• 3.5" x 1.5" acrylic lens
• Armored metal shield sold separately
Black Shield# 0J10-2161-BK
Grey Shield# 0J10-2161-GYOut of stock
Sound Off Signal 140 Series 4.5" LED Marker Light-Red
• Specially engineered lens to boost light output and brightness
• Sonic welded, waterproof construction
• Lens with UV inhibitor preventsHD TRUCK/BUS/POLICE/FIRE/EMS
SuperNova 2 1/2" LED Clearance Marker Light
• Hermetic lens-to-housing seal
• Encapsulant potting for total circuit-board protection
• Uses the same UBS double-seal pigtail as the incandescent version for
GROTE 2" ROUND LED CLEARANCE MARKER LIGHT-RED
• Sealed lamp design, 3-diode LED pattern
• Fits all popular mounting accessories
• Standard female pin connector
Wrap-Around 5 Function Rear Light LH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• Right Hand use 52372
Trailer, RV, Marine & UtilityOut of stock
TRUCK-LITE 10 SERIES LED MARKER/CLEARANCE LIGHT - RED
• Polycarbonate Lens/Housing, Low Profile Flange Mount
• 12V Fit 'n Forget
TRUCK-LITE SUPER 21 INCANDESCENT MARKER/CLEARANCE LIGHT - RED
• 12V Single Bulb, PC, 2 Screw
TRUCK-LITE 30 SERIES LED MARKER/CLEARANCE LIGHT - RED
• 12V/24V Round, PC2, P3, Fit 'N Forget
• Polycarbonate Lens And Housing