Clearance & Marker Lamps
-
VSM ML3K 2 LED MARKER CHROME BEZEL-RED
• Corrosion Resistant Chrome-Plated
• 2-Diodes /14v /.065 amp
• Dimensions: 3” L X 2” W X .94” HOut of stock -
VSM ML3K 2 LED MARKER CHROME BEZEL-AMBER
• Corrosion Resistant Chrome-Plated
• 2-Diodes /14v /.065 amp
• Dimensions: 3” L X 2” W X .94” HOut of stock -
PETERSON 8" FLANGE MOUNT MID-TURN MARKER LIGHT-AMBER
• 6-diode 9-16V operating range with integral reflex
• Two-function may be used as mid-turn & marker/reflector -
PETERSON LED 3D AUXILIARY TUNNEL LIGHT-RED
• For off-road or accessory use only
• Mounts on 4" centers using#10 screws
• Hot wire can connect to either lead -
MicroNova LED Clearance Marker Light-RED
• Integrated theft deterrent feature with C-clip makes it difficult to remove the clearance marker light once mounted
• Encapsulant potting for total circuit-board protectionOut of stock -
MicroNova LED Clearance Marker Light-AMBER
• Integrated theft deterrent feature with C-clip makes it difficult to remove the clearance marker light once mounted
• Encapsulant potting for total circuit-board protectionOut of stock -
M1 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Molded bullet kits come with two replacement mating connectors
• Potted -
M3 Series LED Clearance Marker Light-AMBER
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Potted for total circuit-board protection against vibration and corrosion
• Kits -
2 1/2" Oval LED Clearance / Marker Lamp-Red
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached to metal plate -
Hi Count® Square-Corner 13-Diode LED Clearance/Marker
• Polycarbonate / Acrylic
• Molded snap-ring
• Encapsulent potting for total circuit board -
TRUCK-LITE SIGNAL STAT MARKER/CLEARANCE LIGHT - AMBER
• P2, 2 Screw, Hard-Wired, Stripped End, 12V
• Black Rubber Housing, Aluminum Base -
MAXIMMA 6" CLEARANCE MARKER - AMBER/CLEAR
• 12.8 VDC, Amp Draw 60 Milliamps
• Surface Mount, PL2 ConnectorOut of stock -
MAXXIMA 6-5/8" CHROME OVAL CLEARANCE MARKER - RED/CLEAR
• 12.8 VDC, Amp Draw 60 Milliamps
• PL-2 Connector -
MAXXIMA 6-5/8" CHROME OVAL CLEARANCE MARKER - AMBER
• 12.8 VDC, Amp Draw 60 Milliamps
• PL-2 Connector -
M5 Series LED Clearance Marker Light-AMBER
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Small size fits into narrow applications
• Corrosion-resistant chrome-plated bezels
• Kits contain two replacement -
PETERSON LED STOP/TURN/TAILLIGHT
• 6.5″X2.25″ Oval, Red
• DOT Compliant -
PETERSON LED MARKER/CLEARANCE LIGHT
• 2.6" X 0.75" Sealed/Waterproof Oval -
MAXXIMA OVAL CLEARANCE MARKER - RED
• 12.8 VDC, Amp Draw: 40 Milliamps
• PL-2 Connector -
MAXXIMA OVAL AMBER SIDE TURN/SIDE MARKER
• 12.8 VDC, Amp Draw 380ma/40ma
• 3-Pin Delphi GT 15 ConnectorOut of stock -
SuperNova Oval LED Side Turn Marker
• Male pin and hard shell connection options
• Flashing turn signal is visible to driver during operation
• Single circuit board and single -
TRUCK-LITE 60 SERIES INCANDESCENT MARKER/CLEARANCE LIGHT - AMBER
• 12V P2, Oval Incandescent, Reflectorized Single Bulb, PL-3
• Horizontal Grommet Mount With Flange -
WHELEN ION T SERIES INTERLEAVED 5" RED & BLUE SPLIT LENS
• Linear Super-Led Optics & Hard Coated Lens
• Synchronize To Other Whelen Sync Products -
WHELEN ION T SERIES INTERLEAVED 5" RED & AMBER SPLIT LENS
• Linear Super-Led Optics & Hard Coated Lens
• Synchronize To Other Whelen Sync Products -
M3 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Potted for total circuit-board protection against vibration and corrosion
• Kits -
Thin-Line Single-Bulb Clearance / Marker Lamp
• Amber, Polycarbonate / Acrylic
• Narrow rail and channel-mounting
• Snap-on lens for easy bulb replacement
• Attached pigtail
Two-Bulb Oval Pigtail-Type Clearance / Marker Lamp / Optic Lens
• Amber, Polpropylene / Acrylic
• Standard snap-on lens for easy bulb replacement
• Two stainless-steel
Two-Bulb Square-Corner Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at
MicroNova LED Clearance / Marker Lamp
• Amber w/Chrome Bezel, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant
RazorBack, Amber
• Patent pending electronic design meets all FMVSS 108 marker requirements and also flashes in concert with the turn signal circuitry to act as a
Red Clearance/Marker Replacement Lens
Fits Light Assy 45262
• Length: 3.99" (101.34mm)
• Width: 2" (50.88mm)
• Thickness: 0.75" (19.05mm)