Clearance & Marker Lamps
-
PETERSON LED 3D AUXILIARY TUNNEL LIGHT-RED
• For off-road or accessory use only
• Mounts on 4" centers using#10 screws
• Hot wire can connect to either lead -
PETERSON 14" SUBMERSIBLE LED LIGHT BAR-RED
• Stainless steel bar is corrosion-resistant with three sealed lights
• Long-Life bulbs, pre-wired with 60” lead wire - Piranha LED Slim-Line Clearance & Side Marker
• Sealed 2-diode LED light that functions as clearance or side marker light.
• Operates from 9-16 volts.
• Hard-wired with separate lead - Piranha 2 LED Clearance/Marker w/Reflex
• Operates from 9-16 volts.
• Features 2-wire, hard-wired design.
• Ground wire includes #10 ring terminal.
• Two mounting options: use center stud or -
PETERSON LED 3/4" CLEARANCE/MARKER-RED
• Single Diode, 9-16 Volt Operating Range
• Includes Light And Rubber Mounting Grommet
• Meets DOT Regulations -
PETERSON 6" LED CLEARANCE/MARKER-AMBER
• Hardwired design eliminates the need for plug
• Lens and housing linear welded for durable sealOut of stock -
PETERSON 2" LED CLEARANCE/MARKER-RED
• Single Diode, 9-16 Volt Operating Range
• Accepts industry standard 2-wire plug -
PETERSON 18" LED COVE LIGHT
• 12 Diodes, 9-32 Volt Operating Range
• Surface Screw Mounting -
PETERSON ANTI-FLICKER MODULE & HARNESS
• For use on CANBUS equipped vehicles w/LED HeadlightsOut of stock -
PETERSON LED STOP/TURN/TAILLIGHT
• 6.5″X2.25″ Oval, Red
• DOT Compliant -
PETERSON LED MARKER/CLEARANCE LIGHT
• 2.6" X 0.75" Sealed/Waterproof Oval -
PETERSON 2" LED CLEARANCE LIGHT-AMBER
• Hardwired design, 9-16 Volt Operating Range
• Use standard PL10 2-wire plug or AMP plug -
PETERSON LED MARKER/CLEARANCE LIGHT
• 2-1/2" Amber Round Light/Lens
• DOT Compliant, Clearance/Side Marker -
PETERSON LED MARKER/CLEARANCE LIGHT
• 2" Amber Round Light/Lens
• DOT Compliant, Clearance/Side Marker -
PETERSON LED MARKER/CLEARANCE LIGHT
• 2" Red Round Light/Lens
• DOT Compliant, Clearance/Side Marker -
PETERSON TURN SIGNAL/SIDE MARKER
• 5-1/2" Oblong, Amber IncandescentOut of stock -
PETERSON LED DOME/UTILITY LIGHT
• 3" White Rectangle -
PETERSON 2-1/2" LED AUXILIARY TUNNEL LIGHT W/3D ILLUSION-AMBER
• Mirror look when off, 3D tunnel effect when on
• Compatible with 2" and 2.5" chrome bezels -
PETERSON 2-1/2" LED AUXILIARY TUNNEL LIGHT W/3D ILLUSION-RED
• Mirror look when off, 3D tunnel effect when on
• Compatible with 2" and 2.5" chrome bezels -
PETERSON 4" LED CLEARANCE/MARKER-AMBER
• 4 Diodes, 9-16 volt operating range
• Includes light and bracket with terminal pad -
PETERSON 16" LED ID BAR
• 6 Diodes, 9-16 Volt Operating Range
• Includes Light And Mounting Gasket
• Meets DOT Regulations -
PETERSON 2-1/2" LED CLEARANCE/MARKER-RED
• Single Diode, 9-16 Volt Operating Range
• Accepts industry standard 2-wire plug -
PETERSON 2-1/2" LED STROBE w/SYNC WIRE-AMBER
• 60 triple-flashes per minute meet J595 Class 1 specs
• Will sync with 253SA-1 without an external controller -
PETERSON LED TURN SIGNAL-OVAL
• Sequential Arrow W/Flange 7.88" X 3.63"
• Meets DOT Side Marker Requirements -
PETERSON LED CLEARANCE LIGHT
• 3" Rectangle, Sealed Lens/Housing
• Amber Light/Lens, DOT Compliant -
PETERSON LED CLEARANCE LIGHT
• 3" Rectangle, Sealed Lens/Housing
• Red Light/Lens, DOT Compliant -
PETERSON SINGLE DIODE LED CLEARANCE & MARKER-AMBER
• 9-16V hardwired bullets with 8" leads
• PC Rated, compact design fits 3/4” hole
• Includes rubber mounting grommet -
PETERSON LED CLEARANCE LIGHT
• 2-1/2" Round Red Light/Lens
• DOT Compliant -
PETERSON LED MARKER/CLEARANCE LIGHT
• 2-1/8" Amber Rectangle Light/Lens
• DOT Compliant, Clearance/Side Marker -
PETERSON 2" LED CLEARANCE & MARKER LIGHT-AMBER
• Single-diode design with white diode behind colored lens
• Clearance & side marker light when mounted at 45° angle