Clearance & Marker Lamps

2 1/2" Oval LED Clearance / Marker Lamp - Yellow
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached to

Die-Cast, Aluminum Clearance / Marker Lamp
• Amber Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy

Sealed Turtleback® II Clearance / Marker Lamp / REFLEX LENS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail

SuperNova® Sealed Turtleback® II LED Clearance / Marker Lamp / BUILT-IN REFLECTOR
• Amber, Polycarbonate (Optic) / Acrylic (Reflex)
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid-brass terminals

Amber, Clearance/Marker Replacement Lens
Fits Light Assy G4602, G4603
• Length: 4" (101.6mm)
• Width: 2" (50.88mm)
• Thickness: 0.76" (19.30mm)

Amber, Hi Count® Turtleback® II LED Lamp
• Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Molded bullet with chassis ground-ring terminal connection
• Shock absorbing, heat-resistant lens

Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when

SuperNova Sealed Turtleback II LED Clearance Marker Light
• Dual Intensity, Optic Lens, Male Pin
• Hermetic lens-to-housing seal
• Not designed for vertical mount
• Potted for total circuit

2 1/2" Oval LED Clearance / Marker Lamp
• Red, Polycarbonate
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached to

SuperNova® Low-Profile LED Clearance / Marker Lamp
• Red, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lens

Chrome-Armored Clearance Marker Light
• Flat back; no bulb socket hole required
• Direct interchange for competitive models
• Meets PC function when mounted at a 45° angle
• Material:

MicroNova LED Clearance Marker Light-RED
• Integrated theft deterrent feature with C-clip makes it difficult to remove the clearance marker light once mounted
• Encapsulant potting for total circuit-board protection

MicroNova LED Clearance Marker Light-AMBER
• Integrated theft deterrent feature with C-clip makes it difficult to remove the clearance marker light once mounted
• Encapsulant potting for total circuit-board protection

M1 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Molded bullet kits come with two replacement mating connectors
• Potted

M3 Series LED Clearance Marker Light-AMBER
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Potted for total circuit-board protection against vibration and corrosion
• Kits

Clearance Marker SuperNova LED Light Bar-RED
• Snap-on replacement lamps
• Sealed flow-through UBS harness
• Rugged reinforced polycarbonate bar
• Voltage Amp: 12V / .18A

SuperNova Sealed Turtleback II LED Clearance Marker
• Potted for total circuit board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid-brass terminals are sealed to housing, to resist corrosion and

Wrap-Around 5 Function Rear Light LH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• Right Hand use 52372

2 1/2" Oval LED Clearance / Marker Lamp-Red
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached to metal plate

Clearance / Marker Lamp - Red
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulb

Clearance / Marker Lamp-AMBER
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulb

Sealed Clearance / Marker Lamp
• Red, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate

Sealed Clearance / Marker Lamp
• Amber, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate

Cab Marker Lamp
• Amber, Polypropylene / Acrylic
• Fits flat or slight contour surfaces
• Replaces original equipment on Ford trucks
• Meets sidemarker and front clearance requirements simultaneously

Sealed Turtleback® II Clearance / Marker Lamp / Refle
• Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback® lens

SuperNova LED Clearance / Marker Lamp
• Red Lens, Red Body, Polycarbonate
• Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal

Clearance Marker Light Bar-RED
• Sealed flow-through harness
• Three replaceable snap-on lamps
• Rugged reinforced polycarbonate bar

SuperNova 3" Center Thin-Line Dual-Intensity LED Clearance / Marker Lamp
• Red, Polycarbonate
• Multi-function lamp enhances signaling visibility and safety
• Compact size for narrow mounting locations
• Lamp functions as a marker,

SuperNova 3" Center Thin-Line Dual-Intensity LED Clearance / Marker Lamp
• Amber, Polycarbonate
• Multi-function lamp enhances signaling visibility and safety
• Compact size for narrow mounting locations
• Lamp functions as a

Sealed, OEM Style Side Turn Marker Lamp
• Amber,Polycarbonate
• Surface-mount lamp
• Combination turn signal and side marker