Clearance & Marker Lamps

School Bus Wedge Marker Light-RED
• Adaptable front/side/rear mount
• Galvanized Steel/Acrylic
• Fits most school bus applications

School Bus Rectangular Marker Light-RED
• Fits most school bus applications
• OEM-style w/ Included mounting pad

SuperNova Thin-Line LED Clearance Marker Light
• RED-Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal pigtail

SuperNova 3" Thin-Line LED Clearance Marker Light
• Field-replaceable lens, 3" mounting center
• Meets PC function when mounted at a 45° angle
• Encapsulant potting for total circuit-board protection

M5 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Small size fits into narrow applications
• Corrosion-resistant chrome-plated bezels
• Kits contain two replacement

Two-Bulb Square-Corner Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at

Sealed Turtleback® II Clearance / Marker Lamp / Optic Lens
• Red, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail

SuperNova® LED Clearance / Marker Lamp With Built-In Reflector
• Red, Polycarbonate / Acrylic
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid brass terminals are sealed to

Sealed Rectangular LED Clearance / Marker Lamp
• Red, Acrylic
• Dual Voltage 12V and 24V
• Encapsulant potting for total circuit-board protection against vibration and corrosion
• Hermetic lens to housing seal

Red Clearance/Marker Replacement Lens
Fits Light Assy 45262
• Length: 3.99" (101.34mm)
• Width: 2" (50.88mm)
• Thickness: 0.75" (19.05mm)

Red Clearance/Marker Replacement Lens
Fits Light Assy G4602, G4603
• Length: 4" (101.6mm)
• Width: 2" (50.88mm)
• Thickness: 0.76" (19.30mm)

Red Hi Count® 2 1/2”³ 13-Diode Beehive LED Clearance / Marker Lamp
• Polycarbonate
• Hermetic lens-to-housing seal
• Uses the same UBS double-seal pigtail as the incandescent version for

Red, Hi Count® Square-Corner 13-Diode LED Clearance/Marker
• Polycarbonate / Acrylic
• Molded snap-ring
• Encapsulent potting for total circuit

Two-Bulb Oval Pigtail-Type Clearance / Marker Lamp/ OPTIC LENS
• Red, Polpropylene / Acrylic
• Standard snap-on lens for easy bulb replacement
• Two stainless-steel grounds

Square PC-Rated Clearance Marker Light
• Standard lamps on UPS
• Service life rated at 15,000 hours
• Comes w/ gasket and Sonic sealed lens
• Direct replacement for Truck-Lite®

Thin-Line Single-Bulb Clearance / Marker Lamp
• Red,Polycarbonate / Acrylic
• Narrow rail and channel-mounting
• Snap-on lens for easy bulb replacement
• Attached pigtail

Low-Profile Clearance Marker Light-RED
• Built-in Reflector, w/Bezel
• Field-replaceable lens
• Requires 1 1/4" socket hole for mounting
• Twist-in bulb socket for easy bulb replacement
• Polypropylene/Stainless-Steel/Acrylic

SuperNova® 3" Thin-Line LED Clearance / Marker Lamp **24 Volt**
• Red, Polycarbonate
• 3" mounting center
• Field-replaceable lens
• Encapsulant potting for total circuit-board protection
• Anti-torque design protects against over-tightening and lens