Clearance & Marker Lamps

SuperNova 2" LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Uses same UBS double-seal pigtail as incandescent for quick Plug-and-Go®

SuperNova® Low-Profile LED Clearance / Marker Lamp
• Red, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lens

Chrome-Armored Clearance Marker Light
• Flat back; no bulb socket hole required
• Direct interchange for competitive models
• Meets PC function when mounted at a 45° angle
• Material:

MicroNova LED Clearance Marker Light-RED
• Integrated theft deterrent feature with C-clip makes it difficult to remove the clearance marker light once mounted
• Encapsulant potting for total circuit-board protection

M1 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Molded bullet kits come with two replacement mating connectors
• Potted

Clearance Marker SuperNova LED Light Bar-RED
• Snap-on replacement lamps
• Sealed flow-through UBS harness
• Rugged reinforced polycarbonate bar
• Voltage Amp: 12V / .18A

SuperNova 2 1/2" LED Clearance Marker Light
• Hermetic lens-to-housing seal
• Encapsulant potting for total circuit-board protection
• Uses the same UBS double-seal pigtail as the incandescent version for

Wrap-Around 5 Function Rear Light LH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• Right Hand use 52372

2 1/2" Oval LED Clearance / Marker Lamp-Red
• Surface-mount design for easy installation
• Sealed lamps provide better protection from moisture intrusion
• Self-grounding eyelet grounds lamp when attached to metal plate

Clearance / Marker Lamp - Red
• Fits popular grommets, pigtails and harnesses
• OE replacement for Knapheide®
• Hermetic lens-to-housing seal
• 12,000+ hour bulb

2 1/2" Beehive Clearance / Marker Lamp
• Red, Polycarbonate
• Hermetic lens-to-housing seal
• Twist-on mounting for easy installation
• Fits all competitive and popular mounting devices
• Meets PC function only when mounted

Sealed Clearance / Marker Lamp
• Red, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plate

Sealed Turtleback® II Clearance / Marker Lamp / Refle
• Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback® lens

SuperNova LED Clearance / Marker Lamp
• Red Lens, Red Body, Polycarbonate
• Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal

Clearance Marker Light Bar-RED
• Sealed flow-through harness
• Three replaceable snap-on lamps
• Rugged reinforced polycarbonate bar

SuperNova 3" Center Thin-Line Dual-Intensity LED Clearance / Marker Lamp
• Red, Polycarbonate
• Multi-function lamp enhances signaling visibility and safety
• Compact size for narrow mounting locations
• Lamp functions as a marker,

2" 9-Diode Beehive LED Clearance Marker Light
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• Same UBS double-seal pigtail as the incandescent version for

M3 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Corrosion-resistant, chrome-plated bezels
• Potted for total circuit-board protection against vibration and corrosion
• Kits

2" Round Clearance Marker Light-Red
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

2.5" Round Clearance Marker Light-Red
• Sealed lamp design
• Fits all popular mounting accessories
• Standard female pin connector

Wrap-Around 5 Function Rear Light RH
• For utility and snowmobile trailers
• 5 function: stop, tail, turn, Clearance Marker and reflector
• LH Hand use 52362

School Bus Wedge Marker Light-RED
• Adaptable front/side/rear mount
• Galvanized Steel/Acrylic
• Fits most school bus applications

School Bus Rectangular Marker Light-RED
• Fits most school bus applications
• OEM-style w/ Included mounting pad

SuperNova Thin-Line LED Clearance Marker Light
• RED-Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal pigtail

SuperNova 3" Thin-Line LED Clearance Marker Light
• Field-replaceable lens, 3" mounting center
• Meets PC function when mounted at a 45° angle
• Encapsulant potting for total circuit-board protection

M5 Series LED Clearance Marker Light-RED
• Sleek, aerodynamic styling
• Hermetic lens-to-housing seal
• Small size fits into narrow applications
• Corrosion-resistant chrome-plated bezels
• Kits contain two replacement

Two-Bulb Square-Corner Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at

Sealed Turtleback® II Clearance / Marker Lamp / Optic Lens
• Red, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail

SuperNova® LED Clearance / Marker Lamp With Built-In Reflector
• Red, Polycarbonate / Acrylic
• Encapsulant potting for total circuit board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid brass terminals are sealed to