Clearance & Marker Lamps
-
GROTE MICRO-NOVA LED CLEARANCE / MARKER LAMP - RED
• Hermetic Lens-To-Housing Seal, Small Size Fits In Narrow Applications
• All Versions Meet PC Requirements When Mounted At 45° Angle -
GROTE 15" THIN-LINE LED BAR LAMP - RED
• 3 Leds, Polycarbonate Lens/Housing
• Sealed Impact-Resistant Housing, Shock/Vibration Resistant -
GROTE HI COUNT TURTLEBACK II LED LAMP - RED
• Molded Bullet With Chassis Ground-Ring Terminal Connection
• Shock Absorbing, Heat-Resistant Lens And Lamp Base -
GROTE DUAL INTENSITY MICRONOVA DOT LED MARKER LIGHT - RED
• Dual Intensity Allows For Better Visibility
• Sleek Aerodynamic Styling, Small Size Fits In Narrow Applications -
GROTE 15" THIN-LINE 3-LED LIGHT BAR - RED
• Sealed Marker Lamps Are Shock And Vibration-Resistant
• Impact-Resistant Housing Is Sealed For Moisture Protection -
GROTE CLEARANCE MARKER LIGHT - RED
• 12V / .27A, Polycarbonate Lens, Polypropylene Housing
• Brass Ground Eyelet, Compact Design -
GROTE CAB MARKER WITH SHIELD - RED
• 2 Bulb Design, 1 Self Grounding Wire
• 5.25" X 4.68" Chrome Plated Shield -
PETERSON PIRANHA 4 DIODE LED CLEARANCE/SIDE MARKER
• New Hard-Wired Design Eliminates The Need For Plug
• Eye-Catching Class 8 Look; Great Retrofit Choice -
MAXXIMA 2-1/2" 13 LED CLEARANCE MARKER LIGHT - RED
• 12/24v Dual Voltage, 70ma 12v / 40ma 24v
• Polycarbonate Lens And Housing, Grommet Mount -
SuperNova® Sealed Turtleback® II LED Clearance / Marker Lamp / BUILT-IN REFLECTOR
• Red, Polycarbonate (Optic) / Acrylic (Reflex)
• Encapsulant potting for total circuit-board protection
• Hermetic lens-to-housing seal
• Tin-plated, solid-brass terminalsOut of stock -
24V SuperNova 2" LED Clearance Marker Light
• RED-Hermetic lens-to-housing seal
• Encapsulant potting for total circuit board protection
• Tin-plated, solid-brass terminals are sealed to housing, to resist corrosion -
MicroNova Dot LED Clearance Marker Light-RED
• No fasteners required
• Sleek aerodynamic styling extends less than 3/8" from mounted surface -
School Bus Wedge LED Marker Light-RED
• Potted circuit board
• Mounting gasket included
• Blunt-cut, hardwire termination
• Hermetically sealed construction
• 15 Diodes in both red and amber -
4" Cab Marker 2 Wire-Red
• With Shield Use 5120-1300-10Out of stock -
2 1/2" Clearance / Marker Lamp / OPTIC LENS
• Red, Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• 12-voltOut of stock -
2" Clearance / Marker Lamp
• Red, Polycarbonate
• Hermetic lens-to-housing seal
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• 12-Volt version features a 12,000+ hour bulb
• All versions -
Clearance / Marker Lamp
• Red,Polycarbonate
• Rectangular, double bulb lamp
• 12-volt version features a 12,000+ hour bulb
• Narrow mounting applications
• Hermetic lens-to-housing seal
• Meets PC function only when mounted at aOut of stock -
MicroNova LED Clearance / Marker Lamp
• Red w/ Grommet, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant -
Red, Hi Count® 3-Diode LED Clearance / Marker Lamp
• Polycarbonate
• Hermetic lens-to-housing seal
• Uses the same UBS double-seal pigtail as the incandescent version for a quick Plug-and-GoOut of stock
TRUCK-LITE SUPER 21 INCADESCENT REFLECTORIZED MARKER/CLEARANCE LIGHT - RED
• Single Bulb, P2, 2 Screw, Super 21 Plug, 12v
• 12V Designed At 14V, .33 Amp, 2 Cp
TRUCK-LITE 26 SERIES INCANDESCENT OVAL MARKER/CLEARANCE LAMP - RED
• 12V 2 Bulb, P2, 2-Screw, Hard Wired, Stripped End
• Snap-In Acrylic Lens, Two #194 Wedge Base Bulbs
TRUCK-LITE 35 SERIES 3 LIGHT LED IDENTIFICATION BAR KIT - RED
• 12V, Rectangular, 23 Long, 9" Centers, Silver
Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when
SuperNova 2" LED Clearance Marker Light-RED
• Hermetic lens-to-housing seal
• Fits all popular mountings and grommets
• Fully sealed electronics using encapsulant potting
• Meets PC function when mounted
Powder Coat Black Shield-GREY
• Fits 5150/5170/5180 series markers
• Marker Lamp not includedOut of stock
Sound Off Signal 150 Series 2.5" Beveled LED Marker Light-Red
• Specially engineered lens to boost light output and brightness
• Sonic welded, waterproof construction
• Lens with UV inhibitorHD TRUCK/BUS/POLICE/FIRE/EMSOut of stock
Sound Off Signal 150 Series 2.5" Beveled LED Marker Light-Red
• Specially engineered lens to boost light output and brightness
• Sonic welded, waterproof construction
• Lens with UV inhibitorHD TRUCK/BUS/POLICE/FIRE/EMS
Sound Off Signal Triangle Cab Clearance Marker-Red
• Specially engineered lens to boost light output and brightness
• Sonic welded, waterproof construction
• Lens with UV inhibitor prevents sun fadeHD TRUCK/BUS/POLICE/FIRE/EMS
Die-Cast, Aluminum Clearance / Marker Lamp
• Red Aluminum / Acrylic
• FLAT BACK, NO SOCKET HOLE REQUIRED
• Mounts without disassembly
• Holes interchange with competitive lamps for easy retrofits
• Lens replaces comparable
OPTRONICS 4" DOUBLE BULLSEYE MARKER/CLEARANCE LIGHT-RED
• Single wire with snap-on, replaceable lens
• Surface mount white base, mounts on 3” centers