Clearance & Marker Lamps
- Beehive Clearance Marker-AMBER
• Wide light diffusion optic design
• Bracket is permanently attached
• Fade-resistant, snap-on acrylic lens
• Meets PC function when mounted at a 45° angle
• - Clearance Marker Replacement Lens
• Economy Cab Lens, AMBER
• Length: 5.19" (131.78mm)
• Width: 1.96" (49.86mm)
• Thickness: 1.41" (35.96mm) -
GROTE CLEARANCE MARKER REPLACEMENT LENS
• Small Aerodynamic Cab Lens, Amber
• Length: 7.5" (190.5mm)
• Width: 2.59" (65.78mm)
• Thickness: 1.87" (47.49mm) -
PETERSON TURN SIGNAL/SIDE MARKER
• 5-1/2" Oblong, Amber IncandescentOut of stock - Aerodynamic Cab Marker Light-AMBER
• Easy snap-on lens
• Optics illuminate full lens
• Meets side marker and front clearance requirements simultaneously
• Voltage Amp: 12V / .35A
• Material:Mack/Navistar/Freightliner
Ford/Peterbilt -
TRUCK-LITE 26 SERIES INCANDESCENT CAB MARKER LAMP - AMBER
• 12V Single Beehive Bulb, P2, 2-Screw Mount, PL-10 - Ford Low-Profile Aerodynamic Cab Marker
• Aerodynamic design w/field replaceable lens
• Cab marker replacement for heavy-duty Ford trucks
• Mounting screws included - Thin-Line Single-Bulb Clearance / Marker Lamp
• Amber, Polycarbonate / Acrylic
• Narrow rail and channel-mounting
• Snap-on lens for easy bulb replacement
• Attached pigtail
Two-Bulb Oval Pigtail-Type Clearance / Marker Lamp / Optic Lens
• Amber, Polpropylene / Acrylic
• Standard snap-on lens for easy bulb replacement
• Two stainless-steel2 1/2" Surface-Mount Single-Bulb Clearance / Marker Lamp
Amber, Polypropylene / Acrylic
• 12,000+ hour bulb
• Snap-on lens for easy bulb replacement
• Heavy-duty 2 CP wedge-base bulb
• OE replacement onTwo-Bulb Turtleback Clearance / Marker Lamp / Optic Lense
• Amber, Polypropylene / Polycarbonate / Acrylic
• Turtleback lens design for maximum durability
• Two stainless steel groundsSealed Clearance / Marker Lamp
• Amber, Acrylic
• Hermetic lens to housing seal
• 12,000 hour bulb
• Self grounding eyelet grounds lamp when attached to a metal plateSealed Turtleback® II Clearance / Marker Lamp/ OPTIC LENS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®Sealed, OEM Style Side Turn Marker Lamp
• Amber, Polycarbonate
• Surface-mount lamp
• Combination turn signal and side markerOut of stockFord Light Duty Cab Marker Light-AMBER
• Replaceable bulb design
• Hermetic lens-to-housing seal
• Mounting pad and screws includedClearance Marker Light with Peak Lens-AMBER
• Shock-resistant bulb mount
• Snap-on lens for easy bulb replacement
• Meets PC function when mounted at a 45° angleARROW SAFETY 5" THINLINE INCADESENT MARKER-AMBER
• 12V, 168 bulb, 3 Candela, .35amp, Single Wire-Hot
• ABS plastic base, acrylic lens, zinc plated bronze contacts5180 Series Incandescent Marker-AMBER
• 3.5" x 1.5" Acrylic Lens
• Built in shield with plugOut of stockSentry Sealed Marker/Side Turn Lamp
• Amber, White Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in paddedAmber Clearance/Marker Replacement Lens
Fits Light Assy 45262
• Length: 3.99" (101.34mm)
• Width: 2" (50.88mm)
• Thickness: 0.75" (19.05mm)School Bus Wedge Marker Light-AMBER
• Adaptable front/side/rear mount
• Galvanized Steel/Acrylic
• Fits most school bus applicationsOut of stock4" Cab Marker 2 Wire-Red
• With Shield Use 5120-1300-20Out of stock