Vehicle Lighting

PETERSON 4" 20 LED STOP/TAIL/TURN INDICATOR LIGHT-AMBER/RED
• Turn function in upper half, tail and stop in lower half
• Sealed lens and housing 100,000 hour rated life

PETERSON REPLACEMENT LED SIDE MARKER LIGHT
• Fits Peterson 1288 cluster light module
• Sealed component meets IP67 ingress protection

PETERSON 2" CHROME CHASSIS MOUNTING KIT 
• Grounds through mounting hardware
• Includes bracket, gasket 17" lead wire with .156 bullet

PETERSON 2-1/2" LED UTILITY & LICENSE LIGHT w/PLUG
• Single Diode, 9-32 volt operating range
• 2-wire female plug for easy installation

PETERSON LEAD WIRE BULLET CONNECTOR KIT
• Adapts hardwired leads to 0.180" bullet connectors
• Special ridged design creates  moisture barrier

PETERSON 6" DUAL FACE INCANDESCENT TURN SIGNAL
• Two-stud turn signal includes side marker light with reflector 
• Weather proof, plug-in harness provides for universal mount

PETERSON 4" MULTI-FUNCTION DUAL/QUAD STROBE & REAR TURN SIGNAL-RH HIGH
• 36 LED's function as both Triple-Flash, alternating strobes and rear turn signals
• Activating turn signal automatically overrides strobe

PETERSON 4" 4-LED OVAL DOME & UTILITY LIGHT
• Utility light features 4 Great White diodes behind clear lens
• Multi-volt design is compatible with both 12 and 24 volt

PETERSON 2" LED AUXILIARY TUNNEL LIGHT W/3D ILLUSION-AMBER
• Mirror look when off, 3D tunnel effect when on
• Compatible with 2" and 2.5" chrome bezels

OPTRONICS 27-LED OVAL SEALED DOT BACK-UP LIGHT - WHITE/CLEAR
• Certified For Back-Up Light Function When Installed As Pair In Two-Lamp System
• Accept Standard Two-Pin Plugs, Polycarbonate Lens And

OPTRONICS 4” 21 LED SEALED STOP/TAIL/TURN LIGHT - RED/CLEAR
• Clear Lens, Flange Mount, PL-3 Connection
• Polycarbonate Lens/Housing

OPTRONICS 2.5" MARKER/CLEARANCE LIGHT-AMBER
• Distinctive, patented GloLight design
• Sonically sealed, waterproof
• Accepts standard two-pin PL-10 plug

SUPERIOR SIGNAL 5" AMBER 28 LED LIGHT ASSEMBLY

WHELEN PAR36 5" SUPER-LED WORK LIGHT
• 12VDC, 1,000 Lumens 1.70 Amps
• 6-3/8" H (w/bracket) x 3" D x 5" W

WHELEN 500 SERIES SURFACE MOUNT KIT
• Black TIR6 Super-LED Only

WHELEN SNAP-IN BASE HALOGEN BULB 35W/12V

WHELEN L10 SUPER-LED LOW DOME AMBER BEACON
• SAE Class 1 Certified W/Polycarbonate base
• Full reverse polarity protection
• 100% solid-state electronics

WHELEN M6 SERIES MOUNTING FLANGE CHROME

WHELEN CHROME FLANGE TIR3/LIN3 LIGHTHEADS
• Size: 1.25" H x 1" W x 3" L

WHELEN TIR3 HORIZONTAL MOUNT SUPER LED-AMBER
• Surface mount module with black ABS mounting flange
• Fits dozens of applications, low current and moisture resistant
• 25 ScanLock patterns and synchronization capability

WHELEN ION T SERIES INTERLEAVED 5" AMBER SPLIT LENS
• Linear Super-Led Optics & Hard Coated Lens
• Synchronize To Other Whelen Sync Products
• Easily Surface Mounts With Two Screws

MAXXIMA 4” X 6” 4-LAMP SYSTEM LED HIGH BEAM HEADLIGHT
• GEN-2 "V" Design, Aim Compliant
• Dual voltage non-polarized
• Polycarbonate lens and housing
• DOT FMVSS108 / CMVSS108

GROTE 3" STICK-ON TAPE REFLECTORS - RED
• Adheres permanently to flat or curved surfaces
• Exceeds DOT and SAE "A" reflex requirements
• Durable, impact resistant

GROTE RESEALABLE LICENSE LAMP
• Compact license lamp protrudes less than 2"
• Housing snaps firmly into molded o-ring