Vehicle Lighting

VSM MULTI-FUNCTION INCANDESECENT TAIL LIGHT LH & RH
• Epoxy encapsulated electronics protects against moisture, vibration and corrosion
• Three Stud Mount with Hardware included
• 12-Inch Pigtail harness blunt cut

PETERSON 4" MULTI-FUNCTION DUAL/QUAD STROBE & REAR TURN SIGNAL-LH LOW
• 36 LED's function as both Triple-Flash, alternating strobes and rear turn signals
• Activating turn signal automatically overrides strobe

PETERSON 6.5" MULTI-FUNCTION DUAL/QUAD STROBE & REAR TURN SIGNAL-RH LOW
• 22 LED's function as both Triple-Flash, alternating strobes and rear turn signals
• Activating turn signal automatically overrides strobe

PETERSON 4" MULTI-FUNCTION DUAL/QUAD STROBE & REAR TURN SIGNAL-RH HIGH
• 9 LED's function as both Quad-Flash, alternating strobes and rear turn signals
• Activating turn signal automatically overrides strobe

PETERSON 2-1/2" 2-LED UTILITY LIGHT
• Interior, compartment, courtesy or auxiliary light
• Not for use as legally-required marker or license light

PETERSON LED 3/4" CLEARANCE/MARKER-RED
• Single Diode, 9-16 Volt Operating Range
• Includes Light And Rubber Mounting Grommet
• Meets DOT Regulations

PETERSON 6" LED CLEARANCE/MARKER-AMBER
• Hardwired design eliminates the need for plug
• Lens and housing linear welded for durable seal

PETERSON 2" LED CLEARANCE/MARKER-RED
• Single Diode, 9-16 Volt Operating Range
• Accepts industry standard 2-wire plug

PETERSON LED LICENSE LIGHT
• 4 Diodes, 9-16 Volt Operating Range
• Includes Light And Mounting Gasket
• Requires 2 Lights To Meet DOT Regulations

PETERSON 18" LED COVE LIGHT
• 12 Diodes, 9-32 Volt Operating Range
• Surface Screw Mounting

PETERSON ANTI-FLICKER MODULE & HARNESS
• For use on CANBUS equipped vehicles w/LED Headlights

PETERSON LED STOP/TURN/TAILLIGHT
• 6.5″X2.25″ Oval, Red
• DOT Compliant

PETERSON 4" SQUARE 9-LED WORK LIGHT
• High-output diodes for a bright, even, flood pattern
• Die-cast aluminum body with heat-dissipating fins
• Comes complete with stainless steel mounting hardware

PETERSON LED MARKER LAMP PLUG
• 8" 2-Wire Right Angle

PETERSON 10" EXTENSION HARNESS
• AMP Type Conector for S/T/T

PETERSON PLUG 3-WIRE EXTENSION HARNESS
• 1 Male/1 Female PL3 Stop/Turn/Tail Plug
• Extends Length 12" Between Light & Harness

PETERSON 2" THEFT DETERRENT SECURITY BEZEL-CHROME
• Stainless steel, corrosion resistant
• Fits 2" round flange mounted-lights

PETERSON 4" THEFT DETERRENT SECURITY BEZEL-CHROME
• Stainless steel, corrosion resistant
• Fits 4" round flange mounted-lights

PETERSON LED MARKER/CLEARANCE LIGHT
• 2.6" X 0.75" Sealed/Waterproof Oval

PETERSON 2" LED CLEARANCE LIGHT-AMBER
• Hardwired design, 9-16 Volt Operating Range
• Use standard PL10 2-wire plug or AMP plug

PETERSON LED MARKER/CLEARANCE LIGHT
• 2-1/2" Amber Round Light/Lens
• DOT Compliant, Clearance/Side Marker

PETERSON LED MARKER/CLEARANCE LIGHT
• 2" Amber Round Light/Lens
• DOT Compliant, Clearance/Side Marker

PETERSON LED MARKER/CLEARANCE LIGHT
• 2" Red Round Light/Lens
• DOT Compliant, Clearance/Side Marker

PETERSON TURN SIGNAL/SIDE MARKER
• 5-1/2" Oblong, Amber Incandescent

PETERSON LED DOME/UTILITY LIGHT
• 3" White Rectangle

MAXXIMA PACCAR CAB CLEARANCE MARKER LIGHT
• 12.8 VDC, Amp Draw 100ma
• Polycarbonate Lens, PC And ABS Housing

MAXXIMA 2-1/2" CLEARANCE MARKER - RED/CLEAR
• 7.7 - 14.0 VDC, Amp Draw 40 Milliamps
• 2-Pin Connector, Base Mount, Polycabonate

MAXXIMA 4" THIN-LINE CLEARANCE MARKER - RED
• 12.8 VDC, Amp Draw 40 Milliamps
• 2-Wire Lead Connectors

MAXXIMA CLEARANCE MARKER ID BAR RED/WHITE
• 12.8 VDC, 120 Milliamps
• 2-Hole Surface Mount 16-1/2"

MAXXIMA 4" LED CLEARANCE MARKER - RED/CLEAR
• 7.7 - 14.0 VDC, Amp Draw: 50 Milliamps
• 2-Pin Surface Mount