Motors

TARP MOTOR PM 12V TANG 1.34HP CW/CCW
• 1/4-20 Thru-Bolts
• Shaft Length 0.490"

TARP MOTOR PM 12V TANG 1.34HP CW/CCW
• Shaft Length 0.555"

MOTOR 12V 1.5KW SLOT DRIVE CW

MOTOR 12V 1.5KW TANG DRIVE CW
• Insulated Ground
• With Overload Protection

MOTOR 12V CW SLOTTED DRIVE
• 4.06mm Slot

24V CCW TANG SHAFT INS. GND.

MOTOR PM 12V TANG 1.34HP CW/CCW
• Shaft Length 0.755"
• Shaft Diameter 0.382"
• Raised Alignment Ring Diameter 1.755"
• 5mm Thru-Bolts
• Tang Width 0.152"
• Tang Depth

TILT/TRIM 12V CW/CCW 5-WIRE
• Dual Shaft w/Tang & Slot

MOTOR 12V 1.6KW TANG DRIVE CW
• With Overload Protection
• Insulated Ground
• With Solenoid

MOTOR 12V 1.5KW SLOT DRIVE CW

MOTOR 12V 1.5KW TANG SHAFT CW
• Insulated Ground

TARP MOTOR PM 12V TANG 1.34HP CW/CCW
• 6mm Thru-Bolts
• Shaft Length 0.640"

MOTOR 12V CW 1.5KW TANG DRIVE CW
• Insulated Groud
• Tang 8mm Wide x 8mm Thick
• Raised Alignment Ring 42mm

TILT MOTOR 12V TANG CW/CCW

PALFINGER MOTOR 12V 1.6KW TANG SHAFT CW
• Insulated Ground
• Tang 18mm Wide x 8.00mm Thick
• With Overload Protection
• Raised Alignment Rings 32mm & 42mm

MOTOR PM 12V TANG CW/CCW

WINCH MOTOR 12V TANG 4.5HP CW/CCW
• Shaft 0.52"Diameter, With Two .380 Flats, 1/4" Hole on End

TARP MOTOR PM 12V TANG 1.34HP CW/CCW
• 1/4-20 Thru-Bolts
• Shaft Length 0.640"

MOTOR 12V 1.6KW TANG SHAFT CW
• Insulated Ground
• Tang 18mm Wide x 8.00mm Thick
• With Overload Protection
• Raised Alignment Rings 32mm & 42mm

MOTOR 12V 1.5KW TANG DRIVE CW
• Insulated Ground