Motors

TARP MOTOR PM 12V TANG 1.34HP CW/CCW
• 1/4-20 Thru-Bolts
• Shaft Length 0.490"

TARP MOTOR PM 12V TANG 1.34HP CW/CCW
• Shaft Length 0.555"

MOTOR 24V 2.2KW TANG DRIVE CW
• With Overload Protection
• Insulated Ground
• Tang 8mm Thick x 18mm Wide

MOTOR 12V 1.6KW TANG SHAFT CW
• With Overload Protection
• Insulated Ground
• Tang 8mm Thick x 18mm Wide

MOTOR 24V 2.2KW TANG SHAFT CCW
• Insulated Ground
• With Overload Protection

MOTOR 24V 2.0KW SLOT DRIVE CW
• Insulated Ground
• With Overload Protection

MOTOR PM 24V 0.50HP CW/CCW 1200RPM 20AMP

MOTOR PM 80V 0.8kW 3 PHASE

MOTOR 12V 1.5KW SLOT DRIVE CW

MOTOR 12V 1.5KW TANG DRIVE CW
• Insulated Ground
• With Overload Protection

24V CCW TANG SHAFT INS. GND.

MOTOR PM 12V TANG 1.34HP CW/CCW
• Shaft Length 0.755"
• Shaft Diameter 0.382"
• Raised Alignment Ring Diameter 1.755"
• 5mm Thru-Bolts
• Tang Width 0.152"
• Tang Depth

MOTOR 24V 2.1KW CCW TANG SHAFT
• Insulated Ground

MOTOR 12V 1.6KW TANG DRIVE CW
• With Overload Protection
• Insulated Ground
• With Solenoid

POWER STEERING MOTOR 36/48V 1.2/0.8HP CCW

PARKER PERMANENT MAGNET
• 24V REVERSIBLE
• TANG SHAF

MOTOR 12V 1.5KW SLOT DRIVE CW

MOTOR 24V 1.2KW TANG SHAFT CCW
• Insulated Ground
• Raised Alignment Ring 63.5mm Diameter

MOTOR 12V 1.5KW TANG SHAFT CW
• Insulated Ground

MOTOR 24V 3.0KW TANG SHAFT CW 1600RPM
• Bosch 60 x 60 Flange
• Insulated Ground
• Ventilated Design

TARP MOTOR PM 12V TANG 1.34HP CW/CCW
• 6mm Thru-Bolts
• Shaft Length 0.640"

POWER STEERING MOTOR 36/48V 1.2/0.8HP CCW

MAHLE MOTOR 24V 3.0KW CW

MOTOR 12V CW 1.5KW TANG DRIVE CW
• Insulated Groud
• Tang 8mm Wide x 8mm Thick
• Raised Alignment Ring 42mm

MOTOR 24V 2.2KW TANG SHAFT CW
• Insulated Ground
• With Overload Protection
• Bosch 40 x 400 Flange

MOTOR PM 48V 5.39HP CW/CCW
• Tang Shaft

PALFINGER MOTOR 12V 1.6KW TANG SHAFT CW
• Insulated Ground
• Tang 18mm Wide x 8.00mm Thick
• With Overload Protection
• Raised Alignment Rings 32mm & 42mm

MOTOR PM 12V TANG CW/CCW