Liftgate

WALTCO LOWER LIFT CYLINDER PIN w/TAB
• 5-3/8" Long X 1" Diameter

BUCHER STEEL RESERVOIR
• Overall Length with Collar 24.00"
• Tank Length 21.00"
• Tank Width 7.25"
• Tank Height 6.25"
• Collar Length 2.50"
• 2.00 Gallons Useable

PALFINGER CONTROL SWITCH & CABLE ASSY.
• 3 Button, 5-Wire Coiled Harness

PALFINGER SOLENOID VALVE HARNESS
• Two Wire w/Plug

PALFINGER MOTOR 12V 2.0KW CW SLOT DRIVE
• With Overload Protection
• Thru-Bolts at 3 & 9 Position

PALFINGER HYDRAULIC FOLD CYLINDER
• 17" OAL Closed w/Yoke
• 25mm Mount & Yoke Hole

PALFINGER TILT ANGLE SENSOR

PALFINGER NYLON GROUND ROLLER
• 29mm ID x 63.5mm Diam x 50mm Wide 

WALTCO HYRAULIC CYLINDER
• 2" X 27" Cylinder Length

PALFINGER RESERVOIR MOUNT CLAMP

PALFINGER RESERVOIR MOUNT CLAMP
• With O-Ring and Wire Tie

MAXON 3-WAY CONTROL VALVE

MAXON DUAL HOLE POLY RESERVOIR
• Overall Tank Length with Collar 7.00"
• Tank Length 5.50"
• Tank Width 10.50"
• Tank Height 9.50"
• Has Two Fill Holes

MAXON SOLENOID COIL 10V 25 WATT
• 2 Terminal Deutsch

MAXON LIFTGATE ROLLER
• 64mm OD x 32mm ID

MAXON MAIN POWER SWITCH
• Gravity Down, Dual 8-Pin Plugs

MAXON ALUMINUM THREADED KNOB 5/16-18

PALFINGER PIN PLATE
• 5mm Thick

PALFINGER PLATE PIN WITH TANG
• 36mm Diam. x 93mm Long

PALFINGER GROUND ROLLER & PIN KIT
• 100mm OD Roller & Hardware Included

PALFINGER UPPER/LOWER BODY PIN
• 28mm X 75mm w/6mm Slots

PALFINGER PLATE PIN
• 28mm X 100mm

PALFINGER THREADED BODY PIN
• 25mm X 62mm w/6mm Slots

PALFINGER PLATFORM PIN SHIM
• 28mm ID X 50mm OD X 4mm

PALFINGER ZINC PLATED RETAINING RING
•  For 7/8" Shafts 1.3mm Thk

PALFINGER UPPER/LOWER BODY PIN
• 28mm X 70mm w/6mm Slots

PALFINGER EXTERNAL SNAP RING
• 33mm ID x 1.75mm Thick

PALFINGER CURBSIDE HYDRAULIC PIPE
• Approximately 42" OAL

PALFINGER GROUND ROLLER KIT