(877) 772-1009
Starters - Alternators - DC Motors
Vehicle Lighting Superstore - Liftgate Specialists
HD Air Conditioning Service Parts

Fluid Management - Lumax

LX-3113-10
New  New
Product Available  IN STOCK
$5.82
Lumax 1/8" Hydraulic Grease Fitting 1OPK
• 1/8" P.T.F. Special Short 45º 0.89"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3119-10
New  New
Product Available  IN STOCK
$5.82
Lumax 1/8" Hydraulic Grease Fitting 1OPK
• 1/8" P.T.F. Special Short 90º 0.85"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3201-10
New  New
Product Available  IN STOCK
$6.15
Lumax 1/4" Hydraulic Grease Fitting 1OPK
• 1/4" P.T.F. Special Extra Short
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3301-10
New  New
Product Available  IN STOCK
$3.45
Lumax 6mm Hydraulic Grease Fitting 1OPK
• 6mm x 1mm Taper Thread Straight 0.60"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3303-10
New  New
Product Available  IN STOCK
$6.08
Lumax 6mm Hydraulic Grease Fitting 1OPK
• 6mm x 1mm Taper Metric Thread 45º 0.81"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3305-10
New  New
Product Available  IN STOCK
$6.38
Lumax 6mm Hydraulic Grease Fitting 1OPK
• 6mm x 1mm Taper Metric Thread 90º 0.75"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3307-10
New  New
Product Available  IN STOCK
$5.45
Lumax 8mm Hydraulic Grease Fitting 1OPK
• 8mm x 1mm Taper Metric Thread Straight .063"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3309-10
New  New
Product Available  IN STOCK
$6.81
Lumax 8mm Hydraulic Grease Fitting 1OPK
• 8mm x 1mm Taper Metric Thread 45º 0.81"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3311-10
New  New
Product Available  IN STOCK
$7.79
Lumax 8mm Hydraulic Grease Fitting 1OPK
• 8mm x 1mm Taper Metric Thread 90º 0.75"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3313-10
New  New
Product Available  IN STOCK
$6.69
Lumax Hydraulic Grease Fitting 1OPK
• 10mm x 1mm Taper Metric Thread Strait 0.63"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3315-10
New  New
Product Available  IN STOCK
$8.85
Lumax Hydraulic Grease Fitting 1OPK
• 10mm x 1mm Taper Metric Thread 45º 081"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3317-10
New  New
Product Available  IN STOCK
$8.85
Lumax 10mm Hydraulic Grease Fitting 1OPK
• 10mm x 1mm Taper Metric Thread 90º 0.75"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3505-10
New  New
Product Available  IN STOCK
$2.78
Lumax 3/16" Hydraulic Grease Fitting 1OPK
• 3/16" Dia. Hole Straight 0.50"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3509-10
New  New
Product Available  IN STOCK
$3.00
Lumax 1/4" Hydraulic Grease Fitting 1OPK
• 1/4" Dia. Hole Straight 0.56"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-3511-10
New  New
Product Available  IN STOCK
$4.47
Lumax 5/16" Hydraulic Grease Fitting 1OPK
• 5/16" Dia. Hole Straight 0.56"
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-4801
New  New
Product Available  IN STOCK
$2.84
Lumax 8pc Hydraulic Fitting Asst(SAE)1/4-28
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Kit Includes:
(4)1/4"-28 Taper Thread(SAE-LT) Straight
(2)1/4"-28 Taper Thread(SAE-LT) 45 Degree
(2)1/4"-28 Taper Thread (SAE-LT) 90 Degree
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-4803
New  New
Product Available  IN STOCK
$3.17
Lumax 8pc Hydraulic Fitting Asst(SAE)1/8 NPT
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Kit Includes:
(4)1/8" P.T.F. Special Extra Short Straight
(2)1/8" P.T.F. Special Short, 65 Degree
(2)1/8" P.T.F. Special Short, 90 Degree
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-4807
New  New
Product Available  IN STOCK
$2.84
Lumax 8pc Hydraulic Fitting Asst (Metric) 6mm
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Kit Includes:
(4)6 mm x 1 mm, Taper Thread, Straight
(2)6 mm x 1 mm, Taper Thread, 45 Degree
(2)6 mm x 1 mm, Taper Thread, 90 Degree
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-4808
New  New
Product Available  IN STOCK
$3.17
Lumax 8pc Hydraulic Fitting Asst(Metric)8mm
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Kit Includes:
(4)8 mm x 1 mm, Taper Thread, Straight
(2)8 mm x 1mm, Taper Thread, 45 Degree
(2)8 mm x 1 mm, Taper Thread, 90 Degree
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-4841
New  New
Product Available  IN STOCK
$43.17
Lumax 100pc. Hydraulic Fitting Asst(SAE)
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Kit Includes:
(40)1/4"-28 Taper Thread (SAE-LT), Straight
(10)1/4"-28 Taper Thread (SAE-LT), 45 degree
(10)1/4"-28 Taper Thread (SAE-LT), 90 degree
(20)1/8" P.T.F. Special Extra Short, Straight
(10)1/8" P.T.F. Special Extra Short, 45 degree
(10)1/8" P.T.F. Special Extra Short, 90 degree
(1)Large, 4-way Grease Fitting Tool
(1)Small, 4-way Grease Fitting Tool
Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment
LX-4843
New  New
Product Available  IN STOCK
$50.40
Lumax 100pc. Hydraulic Fitting Asst(METRIC)
• Fully hardened for extra durability and to protect them from wear due to constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
• Every fitting is individually inspected and batch tested to 5,000 PSI
Kit Includes:
(30)6 mm x 1 mm, Taper Thread, Straight
(15)6 mm x 1 mm, Taper Thread, 45 degree
(15)6 mm x 1 mm, Taper Thread, 90 degree
(10)8 mm x 1 mm, Taper Thread, Straight
(5)8 mm x 1 mm, Taper Thread, 45 degree
(5)8 mm x 1 mm, Taper Thread, 90 degree
(10)10 mm x 1 mm, Taper Metric Thread, St.
(5)10 mm x 1 mm, Taper Metric Thread, 45 degree
(5)10 mm x 1 mm, Taper Metric Thread, 90 degree
(1)Large, 4-way grease fitting tool
(1)Small, 4-way grease fitting tool

Automotive, Agricultural, Industrial, Marine
Truck, and Construction Equipment